Cosmetic Paper Box,Color Box,Skincare Beauty Box,Best Skincare Beauty Box Sunchina Packing Limited , https://www.dgsunchina.com
ZC-1210U-series pressure calibrator module use matters needing attention
ZC-1210U-series pressure calibrator module use precautions:
1. The ZC-1210U-series pressure calibrator module should be placed in a clean, non-corrosive environment. If there are special requirements, please indicate in the contract.
2. When the ZC-1210U-series pressure calibrator module is not in use, the power supply should be turned off. If it is not used for a long time, it should be charged once every three months.
3, ZC-1210U- Series pressure calibrator module overload enough, but never severe overload, will cause damage to the sensor, resulting in the instrument can not be used.
4, ZC-1210U-series pressure calibrator module sensor is a high-precision product, the surface of the silicon diaphragm should not collide with solids, otherwise it will damage the sensor.
5, there is no professional testing skills and special testing equipment, do not open the cover for maintenance, but also does not allow adjustment of internal devices, and the replacement of materials, or can not guarantee the reliability of the instrument.
6, do not let the electric iron and other heating elements close to the display in order to prevent burnt bad plastic material.
7, can not use gasoline, alcohol and other chemical solvents scrub panel.
8, ZC-1210U- series pressure calibrator module although seismic design, but should be handled with care much, especially at the site, to avoid Shuaidie, collision.
9. When using the internal DC 24V power supply of the ZC-1210U-series pressure calibrator module, do not short circuit, otherwise it may cause permanent damage to the instrument.