ddfdsfa fdsafadf dd dfsd test cushi , http://www.sitez.com
The 10KV flat ground spiral ground wire is an important electrical safety technical measure. Its operation process should be serious, serious, and in line with technical specifications. It must not be careless. Hanging ground wire is a safety precaution adopted after a power outage. If you do not use or incorrectly use the grounding wire, you will often increase the chance of an accident. Therefore, we must correctly use the grounding wire, standardize the behavior of hanging and dismantling the grounding wire, consciously cultivate rigorous safety work styles, and improve our own safety standards. Only in this way can we avoid hidden dangers beyond a thousand miles to avoid electrical accidents caused by grounding wires. .
skills requirement:
1. The construction 10KV flat spiral grounding wire consists of a grounding end, a grounding conductor and a splint with springs. The outer layer of the grounding wire has an insulating layer. When colliding with the wire, the spring-loaded clamping body in the clamp automatically clamps the wire. Its physical object is shown in the figure.
2. The cross section of the construction grounding line should be selected according to the purpose.
Portable short-circuit grounding wire requirements:
3. First, one end of the construction ground wire is bolted to the grounding body, the clamp plate is opened, and the spring plate is supported. The operator's portable grounding wire is used to align the clamp body with the grounded wire or overhead ground wire, and then the clamp is clamped. Hold the conductor or ground wire.
4. When removing the 10KV flat spiral ground wire, remove the clamp first, and finally loosen the grounding bolt.
5. In places where the induced voltage is high, construction workers should wear antistatic clothing.
6. A grounding warning sign must be grounded.
What are the technical requirements for the 10KV flat ground spiral grounding line?
The company's products are all inspected by the National Institute of Metrology, the Institute of Electrical Engineering and related units; all users who purchase products at the company can send the equipment to the local Institute of Electrical Engineering and related units for inspection. If any of the inspections fails, the full amount will be refunded. paragraph!