Downstream type permanent magnetic cylinder magnetic separator The direction of the ore is consistent with the direction of rotation of the cylinder or the direction of movement of the magnetic product. The slurry is directly fed to the cylinder 1 under the magnetic system of the cylinder 1, and the non-magnetic ore and the magnetically weak ore are two below the cylinder. The gap between the bottom plates is discharged, and the magnetic ore particles are sucked onto the surface of the cylinder, and are rotated with the cylinder to a weak magnetic field at the edge of the magnetic system, and are discharged into the concentrate tank by the unloading water pipe. The downstream magnetic separator has a large processing capacity and is suitable for roughing and selecting rough magnetic materials (greater than 6 mm), or for recovering magnetic heavy media, and can also be used in multiple series. However, the selection index of this magnetic separator is highly influenced by the amount of ore given and is responsive. When the amount of minerals is large, the magnetic ore particles are easily lost to the tailings. Therefore, it is necessary to strengthen the operation and control the lower level of the slurry. Agglomerator Machine,Densifier Machine,Plastic Film Densifier Machine,Film Plastic Agglomerator Densifier ZHANGJIAGANG MYHAL MACHINERY CO.,LTD , https://www.myhalmachinery.com