1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com
1. Outer Diameter: 1/2" to 46"
2. Wall thickness: 0.8mm-4mm
3. Length: Max 12 meters
4. Zinc coating: 60-250g/m2
Â
Outer Diameter
Round:10mm-114mm
Square:10*10mm-100*100mm Rectangular:10*20mm-80*120mm
Thickness
0.4mm-2mm
Length
6m or cut as request.
5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.
Pre Galvanized Square Steel Tube for Middle East Market
Model NO.: WOZE
Origin: Tianjin, China
High -Frequency welded