110-91-8,N-Methyl Morpholine,C4H9NO,Diethylenimide Oxide Identifiers,O(CH2CH2)2NH,1-Oxa-4-azacyclohexane,Tetrahydro-1,4-oxazine,Drewamine,Diethylene imidoxide Jinan Forever Chemical Co., Ltd. , https://www.jinanforever.com
Uses
Industrial applications
Morpholine is a common additive, in ppm concentrations, for pH adjustment in both fossil fuel and nuclear power plant steam systems. Morpholine is used because its volatility is about the same as water, so once it is added to the water, its concentration becomes distributed rather evenly in both the water and steam phases. Its pH adjusting qualities then become distributed throughout the steam plant to providecorrosion protection. Morpholine is often used in conjunction with low concentrations of hydrazine orammonia to provide a comprehensive all-volatile treatment chemistry for corrosion protection for the steam systems of such plants. Morpholine decomposes reasonably slowly in the absence of oxygen even at the high temperatures and pressures in these steam systems.
Organic synthesis
Morpholine undergoes most chemical reactions typical for other secondary amines, though the presence of the ether oxygen withdraws electron density from the nitrogen, rendering it less nucleophilic (and less basic) than structurally similar secondary amines such as piperidine. For this reason, it forms a stable chloramine (CAS#23328-69-0).
It is commonly used to generate enamines.
Morpholine is widely used in organic synthesis. For example, it is a building block in the preparation of the antibiotic linezolid and the anticancer agent gefitinib
Morpholine is used as a chemical emulsifier in the process of waxing fruit. Fruits make waxes naturally to protect against insects and fungal contamination, but this can be lost by means of the food processing companies when they clean the fruit. As a result, an extremely small amount of new wax is applied and morpholine is then added and used as an emulsifier to evenly coat a fruit with the wax.
In research and in industry, the low cost and polarity of morpholine lead to its common use as a solvent for chemical reactions.
As a component in fungicides
Morpholine derivatives used as agricultural fungicides in cereals are known as Ergosterol Biosynthesis Inhibitors.
Morpholines
fenpropimorph
tridemorph
Piperidines
fenpropidin
Parker Kittiwake introduces new onboard catalytic fine powder...
Parker Kittiwake's shipborne catalytic fines test kit detects catalytic fines to prevent irreparable damage to fuel pumps, fuel injectors, pistons (purchasing supplies) rings and cylinder liners (purchasing supplies) .
Parker Kittiwake, a provider of asset control and protection technology, has introduced a new catalytic fines test package. On-board testing has confirmed the presence of ground silicon and aluminum catalyzed fines. If not detected, these fines may be embedded in the engine (purchasing supply) parts and cause wear and tear, causing irreversible damage to the ship's fuel system.
When the fuel storage time is extended, the residue of the catalyzed fines-refinery cracking process, the deposition and accumulation of fuel, will become a deposit in the tank. If the deposits in these tanks are not drained regularly, it is possible to enter the fuel system and cause damage to the fuel pump injectors, piston rings (purchased from the product library) and the liner.
According to Parker Kittiwake, in the past, the detection of catalyzed fines in fuel was only obtained after sampling the fuel samples and sending them to the laboratory for analysis. This new Catalytic Fines Test Kit provides inspection results on board and only a few minutes, providing the shipowner with immediate and accurate results of the level of corrosion present, so it can be prevented before the corrosion element causes fatal damage.
The Catalytic Fine Powder Test Kit is a chemical bottle test that determines the level of catalytic fines in a representative sample of fuel, allowing the ship operator to determine the entry of the abrasive and the fuel to the component before the abrasive enters the fuel system. Damage caused. The Catalytic Fines Test Kit can be used in conjunction with laboratory testing and other on-board condition monitoring (product library supply) tools to ensure that ship operators receive reliable and accurate data to prevent potentially catastrophic damage.