High speed automatic cross cutting machine
This cross-cutting machine is driven by high precision stepper motor and controlled by PLC microcomputer for fixed length, positioning and quantitative cutting of rolled materials.
Cutting materials: PVC film, PE film, non-woven fabric, Kraft paper, release paper, highland barley paper, insulating paper, release paper, copper foil, aluminum foil, gold and silver card paper, plain rainbow paper, positioning laser transfer paper, white board paper plastic sheet, PET film, reflective film, OPP film, PE film, hot melt film, heat transfer printing film, all kinds of non-woven fabric, insulating paper, beautiful grain paper, etc.
Crisscross cutting machine is assembled slitting knives on standard cutting machine and meet the slitting requirement of customers.
Flying Man high speed cutting machine has below advantages: High precision, Low loss, Fixed timing, Fixed speed and fixed length cutting, High efficiency, Save time and effort.
Cross Cutting Machine,Paper Slitting Machine,Paper Roll Slitting Machine,Jumbo Roll Slitting Machine Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com
1. UHF series have high frequency, able to heat materials of 0.1mm.
2. Resonant conversion of frequency technology: High efficiency, the power consumption is only 20%-50% of consumption of vacuum tube induction heating equipment.
3. MOSFET technology based, high frequency, light weight and small size.
4. Simple design: Easy installation, there is no need for regulation and convenient using.
5. Safe and Reliable: The equipment has no high voltage, operating safely.
6. Application: Heating, Welding, Melting, Quenching etc.
Â
ModelÂ
JLCG-30KW Â
Work powerÂ
 Three phase 380V
Maximum input currentÂ
45A
Output powerÂ
30kw
Fluctuating frequencyÂ
50-200KHZ
The flow rate of cooling waterÂ
0.3Mpa
Water temperature protection pointÂ
 < 40º C
Duty cycle
100%
Our Services:
1. Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.Â
2. Inquiry and consulting support.Â
3. Sample testing support.Â
4. View our Factory.
2. In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
3. After-sale service:
1. 12 months warranty period
2. Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, Jinlai shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, Jinlai will send maintenance
4. technician to provide visiting service after checking with the customer and charge for a favorable price.Â
5. Jinlai will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.
FAQ
China Supplies Induction Heating Power Supply  Â
Questions and Answers:
1. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.
2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
3.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
4. Which export port you use?
Any China port, commonly we will use Shenzhen ,Guangzhou ,Hongkong port, it can appoint as you like.
5.How about the payment terms and delivery time ?
Payment terms for small machines: 100% T/T/ Western Union/Cash in advance.
The big machines and big amount: 30% deposit,70% before shipment (we will shoot total delivering process for customer's confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.
6.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.
7.Is your goods has ISO9001 or CE certificate ?
Yes, all our goods has ISO and CE certificate. All machines are high quality goods.
8.What is your nature of your company:dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us.Â
Induction Metal Quenching Machine Tool
1. UHF series have high frequency, able to heat materials of 0.1mm.
2. Resonant conversion of frequency technology: High efficiency, the power consumption is only 20%-50% of consumption of vacuum tube induction heating equipment.
3. MOSFET technology based, high frequency, light weight and small size.
4. Simple design: Easy installation, there is no need for regulation and convenient using.
5. Safe and Reliable: The equipment has no high voltage, operating safely.
6. Application: Heating, Welding, Melting, Quenching etc.
Â
ModelÂ
JLCG-30KW Â
Work powerÂ
 Three phase 380V
Maximum input currentÂ
45A
Output powerÂ
30kw
Fluctuating frequencyÂ
50-200KHZ
The flow rate of cooling waterÂ
0.3Mpa
Water temperature protection pointÂ
 < 40º C
Duty cycle
100%
Our Services:
1. Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.Â
2. Inquiry and consulting support.Â
3. Sample testing support.Â
4. View our Factory.
2. In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
3. After-sale service:
1. 12 months warranty period
2. Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, Jinlai shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, Jinlai will send maintenance
4. technician to provide visiting service after checking with the customer and charge for a favorable price.Â
5. Jinlai will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.
FAQ
China Supplies Induction Heating Power Supply  Â
Questions and Answers:
1. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.
2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
3.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
4. Which export port you use?
Any China port, commonly we will use Shenzhen ,Guangzhou ,Hongkong port, it can appoint as you like.
5.How about the payment terms and delivery time ?
Payment terms for small machines: 100% T/T/ Western Union/Cash in advance.
The big machines and big amount: 30% deposit,70% before shipment (we will shoot total delivering process for customer's confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.
6.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.
7.Is your goods has ISO9001 or CE certificate ?
Yes, all our goods has ISO and CE certificate. All machines are high quality goods.
8.What is your nature of your company:dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us.Â
Induction Metal Quenching Machine Tool (JLCG-30KW)
Model NO.: JLCG-30KW
Input Voltage: 3 Phase 380V
Duty Cycle: 100%
Including Parts: Generator,Transformer,Induction Coils,Cable
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: JIN LAI
Transport Package: Plywood Case
Specification: ISO9001: 2008, SGS, CE
Origin: Guangdong, China(Mainland)
HS Code: 8514400090
Model NO.: JLCG-30KW
Input Voltage: 3 Phase 380V
Duty Cycle: 100%
Including Parts: Generator,Transformer,Induction Coils,Cable
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: JIN LAI
Transport Package: Plywood Case
Specification: ISO9001: 2008, SGS, CE
Origin: Guangdong, China(Mainland)
HS Code: 8514400090
Induction Metal Quenching Machine Tool