Golf originated in Scotland in the fifteenth century or earlier. Nowadays, more and more people choose leisure and entertainment. The venue of golf is very different from other sports, so golf goes to the electric sightseeing car in the stadium and becomes the most important mobile tool for people. You may encounter some common problems with sightseeing cars on the stadium. After reading this article, you will understand the common problems and analysis of sightseeing cars. In the use of golf sightseeing vehicles, there is sometimes a dilemma of no electricity, which will directly lead to the vehicle can not ignite. Under normal circumstances, the battery is charged at night, and the average charging time is about 8 hours. During the day, the battery should be used by consumers in a saturated state. In addition, the charging time is not as long as possible. Many people may think that long-term charging can make the sightseeing car use longer. In fact, this is not the case. The staff needs to carry out necessary charging according to the actual situation to avoid harmful charging. . Speaking of charging, there may be a phenomenon that the charger cannot charge the battery. First, check whether the charger matches the battery and do not charge blindly. After that, check if the charger is damaged and the cable is broken. If it is a problem with the charging device, replace the charger and charger cable. If not, check if the charging voltage meets the requirements. In addition, there may be reasons such as the steering wheel cannot be turned, the vehicle cannot move forward or backward, the brake malfunctions, and the like. The reason why the steering wheel cannot be turned may be that the steering wheel or vertical shaft is short of oil. Just add oil to the steering wheel and the vertical shaft. If it is encountered in the vehicle can not move forward or backward, you can check the line for poor contact or damage. The phenomenon of brake failure is not common. If you really encounter such problems may be due to improper adjustment of the brake pads or damage to the brake master cylinder, then you can readjust the brake pads and replace the master cylinder. There are corresponding solutions to such problems. If you really can't solve the problem of the vehicle, you can look for the management office to help solve the problem. Cutting Press,Knit Shirt Bottom Cutting Machine,T-Shirt Bottom Cutting Machine,Knit T-Shirt Bottom Cutting Machine Ngai Shing Development Limited , https://www.ngaishinghk.com