Roller Driven Wood Pellet Machine

Our flat die pellet machines are devided into two series, the KL series pellet mills and the MKL series pellet mills. KL series pellet mills can both press feed pellets and wood sawdust pellets, but it's better to make animal feed pellets. Our MKL series pellet mills have the special design for making wood pellets.

Small Wood Pellet Press Machine specially designed for mass industrial production of wood pellets. The raw materials are easy to obtain, like groundnut shell, sawdust, paddy straw, wheat straw, palm husk, rice husks, etc and forestry wastes. The final pellets can be used for industrial boilers and large power plants as well as home heating.

Specifications

1.This machine is flat die pellet machine driven by electrical motor, 15kw, 380v, three phase.

2. Our MKL series pellet mills have the special design for making wood sawdust pellets.

3.The size of the final pellets: 2.5-10mm is ok, there are 2.5mm,3mm, 4mm, 6mm, 8mm and 10mm for your choose.

4. Moisture content of the raw materials: 12%-20%.

5. Capacity: 300-400kg/h

 

The Technical Parameters of MKL Series Wood Pellet Machines

Model	Power	Voltage V/50HZ	Die Diameter	Die Hole Specification	Sawdust Capacity	Packing Size
MKL225	7.5kw	380V	225mm	2.5-10mm	120-200kg/h	102*48*98cm
MKL229	11kw	380V	229mm	2.5-10mm	180-250kg/h	102*49*98cm
MKL295	15kw	380V	295mm	2.5-10mm	300-400kg/h	108*106*52cm
MKL335	22kw	380V	335mm	2.5-10mm	400-500kg/h	114*54*114cm
MKL395	30kw	380V	395mm	2.5-10mm	500-600kg/h	152*60*115cm

What are the differences between D type pellet mills and R type pellet mills? 

D type, literally is called rotating die type while R type is called rotating roller type. Mechanically, the prominent difference lies in motion pattern of die and roller, and transmission components. In terms of price, with the same configuration (capacity, power, etc), D type pellet mill is cheaper than R type because the latter has smarter design of pelletizing process and a better gearbox, though both types of pellet mill are competent of making quality pellets.

 

What could I do if the pellet mill can't produce pellets?

A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of
mould and bad cooperation in new devices. After using oily material for a period, the pellet machine
can run smoothly.

B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to
1.5-2.5 mm.

C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term
service.

D: The material is too wet or too dry, resulting in low productivity. You'd better increase or decrease
the moisture to proper rate, generally 13%-16% in raw material.

Pellets as fuel

Wood pellet machine is specially used for producing wood pellets, a new environmental fuel instead of the coal
and oil.The raw material is wide and usually make use of the waste .  such as sawdust, wood shavings, wood chips, wood
logs, straw, rice husk, cotton stalk, peanut shell, bamboo, empty fruit branches, roseamary waste, other plant wastes etc.

 Home pellet stove is widely used in Europe and many other places in the world. It is an environment-friendly method to
keep warm and cook. Pellet stove uses less natural resources as its fuel is generated from waste or recycled materials. 
The fuel it used can be made at home. Here are a few tips for you to spend less money making the stove fuel if you choose
a pellet stove for heating. 

You have to prepare raw materials along with a flat die pellet mill which is

press the materials into the needed fuel for home. There are a wide variety of raw materials that you can use to make the
fuel, such as fruit pits, different types of grass, corn cobs, barley star, shelled corn, wheat, paper, etc. Your choice of
materials decides the heating or cooking effect, thus you need to look up the kind of stove to properly match the pellet fuel. 


Our Company      
Laizhou Chengda Machinery Co., Ltd 

Payment Method

Sales Director: Cealian Chen
Tel: +8615805353812
Â
Â
Address: Sanlihezi Village, Wenfeng District, Laizhou City, Shandong Province, China

Acetyl Tributyl Citrate(ATBC)

Acetyl Tributyl Citrate(ATBC) is an innocuous Plasticizer, mainly used as plasticizer of PVC, cellulose Resin and synthetic rubber, used in innocuous PVC grain, Produce food packaging material, medical products, prepare flavor, essence, soft toys for children and produce cosmetics etc. Acetyl Tributyl Citrate(ATBC)compatible with polyvinyl butyra, partly compatible with cellulose acetate, cellulose acetate butyrate. The cold resistance and light resistance are similar to those of trinbutyl citrate. Water resistance is better.

Acetyl Tributyl Citrate,ATBC,Plasticizer ATBC,Environment Friendly Plasticizer ATBC,ATBC For Children Toys,ATBC 99%

HENAN JINHE INDUSTRY CO.,LTD , https://www.hncarbonblack.com