The light incubator is a widely used and relatively important instrument for agricultural research. It can provide environmental parameters of crop growth, such as temperature, light, etc., so it can meet the basic growth needs of crops by setting, but it is in use. During the process of lighting the incubator, the user may also encounter some problems, some of which are caused by maintenance failures, some may be due to non-standard operation, and some may be due to instrument failures. The box of several common problems, and gives the corresponding solutions, hoping to help users.
The belt conveyor is widely used in such industries as of metallurgy, mining, coal, harbor, power station, building materials, chemical engineering, light industry, petroleum, grains, heating, etc. Rubber Conveyor Belt,Tunnel Belt Conveyor,Conveyor Belt Pulley,Steel Belt Conveyor Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrushers.com
1. What is the reason why the light incubator has poor cooling effect or is not cooled?
A: First, you can open the glass door of the light incubator and put your hand on the bottom of the incubator to see if there is wind coming out of the gap at the bottom. If there is indication that the fan is not broken, it is probably a problem with the coolant or Capillary blockage. Otherwise, replace the fan.
2. What is the reason why the light incubator has no noise during cooling?
Answer: It may be that the light bulbs of the incubator are loose. You can check the screws. If they are loose, tighten them in time.
3. What should I do if the light incubator lighting is off or dark?
A: The lights are off. Most of the lights are not aligned or the feet are loose, or the electronic ballast or the lamp is broken. However, the lights are dark, it may be that you have only turned on several lights. It is recommended that you open a few more lights. Xenon lamp.
In fact, the light incubator is a common and commonly used instrument and equipment. Occasionally, some failures are normal phenomena. In the event of a failure, what we need to do is to carefully record the occurrence of failures and resolve them in time. Of course, as non-professionals, there are some breakdowns that we cannot solve. At this time, we need to call a professional after-sales staff to solve the problem. However, the light incubator produced by Top Cloud Yunnong is relatively simple to operate. It only needs to follow the operating procedures written on the product manual. It is believed that the use of the light incubator will soon be mastered.
Conveyor is adaptable to both stationary and mobile crushing plants, it is widely used in mining, metallurgical, and coal industry to transfer sandy or lump materials, or packaged materials. The transfer system can be one single or multi-conveyors or combined with other transfer equipments according to various transferring requirements.