The light incubator is a widely used and relatively important instrument for agricultural research. It can provide environmental parameters of crop growth, such as temperature, light, etc., so it can meet the basic growth needs of crops by setting, but it is in use. During the process of lighting the incubator, the user may also encounter some problems, some of which are caused by maintenance failures, some may be due to non-standard operation, and some may be due to instrument failures. The box of several common problems, and gives the corresponding solutions, hoping to help users. A Cone Crusher is a compression type of machine that reduces material by squeezing or compressing the feed material between a moving piece of steel and a stationary piece of steel. Cone Crusher,Portable Cone Crusher,Stone Cone Crusher Machine,Industrial Cone Crusher Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrushers.com
1. What is the reason why the light incubator has poor cooling effect or is not cooled?
A: First, you can open the glass door of the light incubator and put your hand on the bottom of the incubator to see if there is wind coming out of the gap at the bottom. If there is indication that the fan is not broken, it is probably a problem with the coolant or Capillary blockage. Otherwise, replace the fan.
2. What is the reason why the light incubator has no noise during cooling?
Answer: It may be that the light bulbs of the incubator are loose. You can check the screws. If they are loose, tighten them in time.
3. What should I do if the light incubator lighting is off or dark?
A: The lights are off. Most of the lights are not aligned or the feet are loose, or the electronic ballast or the lamp is broken. However, the lights are dark, it may be that you have only turned on several lights. It is recommended that you open a few more lights. Xenon lamp.
In fact, the light incubator is a common and commonly used instrument and equipment. Occasionally, some failures are normal phenomena. In the event of a failure, what we need to do is to carefully record the occurrence of failures and resolve them in time. Of course, as non-professionals, there are some breakdowns that we cannot solve. At this time, we need to call a professional after-sales staff to solve the problem. However, the light incubator produced by Top Cloud Yunnong is relatively simple to operate. It only needs to follow the operating procedures written on the product manual. It is believed that the use of the light incubator will soon be mastered.
A Cone Crusher is a compression type of machine that reduces material by squeezing or compressing the feed material between a moving piece of steel and a stationary piece of steel. Final sizing and reduction is determined by the closed side setting or the gap between the two crushing members at the lowest point. As the wedge or eccentric rotates to cause the compression within the chamber, the material gets smaller as it moves down through the wear liner as the opening in the cavity gets tighter. The crushed material is discharged at the bottom of the machine after they pass through the cavity.