1000mm cantilever wire stranding machine for the assembly of multi-strand cored wire

 

1) Application:

 

Cantilever wire stranding machine is used to twist multi-core wires such as high-frequency wire, data wire, computer wire and power lines etc.

 

2).Equipment composition:

 a. Φ400-630mm* 26-head tension gun payoff ---------------------------------------------------------------------- 1 Set

b. Central taping machine + longitudinal aluminum foil stand + wire assembly stand three in one ----1 Set

c. Electrical control cabinet------------------------------------------------------------------------------------------------1 Set

d. Mainframe------------------------------------------------------------------------------------------------------------------1 Set

 

3).Equipment specification:

1. Φ400-630mm* 26-head assembly payoff:

2.Type: bilateral single layer, shaft type passive payoff

3. Pay-off way: adopting combination guide pulley payoff

4. adopting spring tension gun + brake belt adjusting tension

5. Way of locking bobbin: adopting cone-jacking + cone-jacking screwed locking bobbin

6. Bobbin transmission way: adopting bearing transmission

7. Caster: adopting 3" brake movable caster

8. Applicable bobbin size: Φ400-630mm bobbin (detailed size shall be provided by customer)

9. Equipped with tension and wire break sensing device

 

4). Central taping machine:

1. Type: single-head separable center taping

2. Driven power: 2HP AC brake motor (Siemens) + inverter (Yaskawa)

3. Taping direction: "S"or"Z" stranding direction that can be converted arbitrarily via internal adjustment switch

4. Tape rotary plate: plate diameter: Φ450mm, width: 15mm~30mm; hole diameter: 50mm

5. Applicable material: cotton paper, Mylar tape, aluminum foil

6. Taping distance: adopting motor adjustment (only adjust when the machine is running at a slow speed)

7. Tension adjustment: adjusted outside of the machine, it can be adjusted arbitrarily when running, the tension can be also adjusted separately

8. Taping speed: Max.2000RPM, interlock with single twisting machine

9. Tape-coiling guide rod: Φ16mm hole *460mm length

 

5).Longitudinal Aluminum foil stand:

1. Applicable aluminum foil plate diameterΦ480mm, aluminum foil width: 10mm-35mm, aluminum foil hole diameter: 2"~3"

2. Tension adjustment: adopting belt wheel + flat belt

 

6). Cantilever single twisting machine:

1. Application: multi-wire assembly and continuous taping of PVC, PE wires, power wires including filling, control cable, communication cable and coaxial cables etc.

2. Applicable single wire diameter: Φ1.0~8.0mm, stranded diameter: Max.Φ25mm

3. Pitch scope: 30~300mm [electronic gear pitch], traversed distance scope: 3~20mm [PLC data setting], pitch control: differential + AC motor + inverter + decoder + PLC (pitch error within ±0.2mm under steady speed state ), pitch adjustment: input setting value on the touch screen directly, automatic tracking the pitch after the pitch is set.

4. Main shaft rotary speed: Max. 750RPM, normal speed 600RPM/min.

5. Coiling iron bobbin size: Φ1000mm (stamping iron bobbin)

6. Wire-distribution eyelet plate layout is 1+6+12+18 equitable distribution, eyelet material: ceramics

7. Bobbin lifting way: adopting 1HP motor + oil-pressure system + button to control lifting bobbin

8.Way of loading/unloading bobbin: adopting oblique plate+ turning plate with 180 degree positioning, push bobbin manually

9. Power:

-  Mainframe power: 25HP*4P AC motor (Siemens) + inverter (YASKAWA)

-  Coiling power: 5HP*6P brake motor (Siemens) + inverter (YASKAWA)

10. FWD and REV stranding direction: realizing "S" or "Z" stranding direction by adjusting the switch inside the control cabinet for changing the rotary direction of motor.

11. Traversing method: bearing type, adopting imported rolled ball screw + precise slideway to proceed with traversing, traversed distance power: 1/2HP AC gear motor + inverter; traversed distance control: AC motor + inverter + decoder + PLC (traversed distance error within ±0.05mm under steady speed state)

12. Safety measurements: machine can't start in case of any failure display such as door un-closed well, bobbin loosing, supporting plate positioning etc.

13. Automatically shutdown in case of wire break and bobbin being full

14. Wire-crossing guide pulley groove diameter: Φ150mm (surface shall be coated with ceramics)

15. Bearings: SKF

16. Meter-counting precision: 0.8%

 

7) Brands for the main parts of the equipment:

1. Inverter brands: YASKAWA

2. Motor brands: SIEMENS

3. PLC brand: MITSUBISHI

4. Other electrical components adopt SCHNEIDER brand

5. Bearing brand: SKF

6. Decoder adopts LIKE high-definition product

 

8) Currently we the following models for the cantilever wire stranding machine:

 

 

1000mm cantilever wire stranding machine for the assembly of multi-strand cored wire

 

1) Application:

 

Cantilever wire stranding machine is used to twist multi-core wires such as high-frequency wire, data wire, computer wire and power lines etc.

 

2).Equipment composition:

 a. Φ400-630mm* 26-head tension gun payoff ---------------------------------------------------------------------- 1 Set

b. Central taping machine + longitudinal aluminum foil stand + wire assembly stand three in one ----1 Set

c. Electrical control cabinet------------------------------------------------------------------------------------------------1 Set

d. Mainframe------------------------------------------------------------------------------------------------------------------1 Set

 

3).Equipment specification:

1. Φ400-630mm* 26-head assembly payoff:

2.Type: bilateral single layer, shaft type passive payoff

3. Pay-off way: adopting combination guide pulley payoff

4. adopting spring tension gun + brake belt adjusting tension

5. Way of locking bobbin: adopting cone-jacking + cone-jacking screwed locking bobbin

6. Bobbin transmission way: adopting bearing transmission

7. Caster: adopting 3" brake movable caster

8. Applicable bobbin size: Φ400-630mm bobbin (detailed size shall be provided by customer)

9. Equipped with tension and wire break sensing device

 

4). Central taping machine:

1. Type: single-head separable center taping

2. Driven power: 2HP AC brake motor (Siemens) + inverter (Yaskawa)

3. Taping direction: "S"or"Z" stranding direction that can be converted arbitrarily via internal adjustment switch

4. Tape rotary plate: plate diameter: Φ450mm, width: 15mm~30mm; hole diameter: 50mm

5. Applicable material: cotton paper, Mylar tape, aluminum foil

6. Taping distance: adopting motor adjustment (only adjust when the machine is running at a slow speed)

7. Tension adjustment: adjusted outside of the machine, it can be adjusted arbitrarily when running, the tension can be also adjusted separately

8. Taping speed: Max.2000RPM, interlock with single twisting machine

9. Tape-coiling guide rod: Φ16mm hole *460mm length

 

5).Longitudinal Aluminum foil stand:

1. Applicable aluminum foil plate diameterΦ480mm, aluminum foil width: 10mm-35mm, aluminum foil hole diameter: 2"~3"

2. Tension adjustment: adopting belt wheel + flat belt

 

6). Cantilever single twisting machine:

1. Application: multi-wire assembly and continuous taping of PVC, PE wires, power wires including filling, control cable, communication cable and coaxial cables etc.

2. Applicable single wire diameter: Φ1.0~8.0mm, stranded diameter: Max.Φ25mm

3. Pitch scope: 30~300mm [electronic gear pitch], traversed distance scope: 3~20mm [PLC data setting], pitch control: differential + AC motor + inverter + decoder + PLC (pitch error within ±0.2mm under steady speed state ), pitch adjustment: input setting value on the touch screen directly, automatic tracking the pitch after the pitch is set.

4. Main shaft rotary speed: Max. 750RPM, normal speed 600RPM/min.

5. Coiling iron bobbin size: Φ1000mm (stamping iron bobbin)

6. Wire-distribution eyelet plate layout is 1+6+12+18 equitable distribution, eyelet material: ceramics

7. Bobbin lifting way: adopting 1HP motor + oil-pressure system + button to control lifting bobbin

8.Way of loading/unloading bobbin: adopting oblique plate+ turning plate with 180 degree positioning, push bobbin manually

9. Power:

-  Mainframe power: 25HP*4P AC motor (Siemens) + inverter (YASKAWA)

-  Coiling power: 5HP*6P brake motor (Siemens) + inverter (YASKAWA)

10. FWD and REV stranding direction: realizing "S" or "Z" stranding direction by adjusting the switch inside the control cabinet for changing the rotary direction of motor.

11. Traversing method: bearing type, adopting imported rolled ball screw + precise slideway to proceed with traversing, traversed distance power: 1/2HP AC gear motor + inverter; traversed distance control: AC motor + inverter + decoder + PLC (traversed distance error within ±0.05mm under steady speed state)

12. Safety measurements: machine can't start in case of any failure display such as door un-closed well, bobbin loosing, supporting plate positioning etc.

13. Automatically shutdown in case of wire break and bobbin being full

14. Wire-crossing guide pulley groove diameter: Φ150mm (surface shall be coated with ceramics)

15. Bearings: SKF

16. Meter-counting precision: 0.8%

 

7) Brands for the main parts of the equipment:

1. Inverter brands: YASKAWA

2. Motor brands: SIEMENS

3. PLC brand: MITSUBISHI

4. Other electrical components adopt SCHNEIDER brand

5. Bearing brand: SKF

6. Decoder adopts LIKE high-definition product

 

8) Currently we the following models for the cantilever wire stranding machine:

 

 

Alkaline Sodium Silica Sol

Because of sodium ion is easy to moisture absorption, low melting point, strong polarity, etc, to conform to the requirements of the coating and other industries use, the company on the basis of the type of alkaline sodium Silica Sol developed low alkaline silica sol sodium products, its main characteristic is to reduce the content of sodium oxide, make it applied in paint industry, has better get damp resistance, scrubbing resistance and resistant to pollution; When used in other industries, it shows better cohesiveness, refractories and product stability.

1, the company generally uses 25KG, 250Kg, 1000Kg polyethylene plastic drum packaging, and 16-20 tons of container liquid bags, users can choose according to their own needs;



2. In the process of storage and transportation, knock damage and leakage should be prevented; Avoid freezing and direct sunlight, strictly prohibit insolation, the best temperature 5-30℃; Pay attention to the entry of dust and other impurities; The normal (5-30℃) warranty period of the product is one year. Long-term high or low temperature will cause structural damage and shorten the stability period. It is recommended to use the product within six months to avoid expiration and failure.

Alkaline Sodium Silica Sol,Sodium Colloidal Silica,Low Sodium Colloidal Silica,High Concentration Colloidal Silica

SHANDONG YINFENG NANO NEW MATERIALS CO., LTD. , https://www.yinfengsilica.com