PVC pipe is extruded by hot pressing method after the cooperation of PVC resin, stabilizer and lubricant. It is the earliest plastic pipe developed and applied.
PVC-U pipe has strong corrosion resistance, easy adhesion, low price and hard texture. However, due to the leakage of PVC-U monomer and additives, it is only suitable for water supply system with transmission temperature not exceeding 45 ℃. Plastic pipes are used for drainage, wastewater, chemicals, heating and cooling fluids, food, ultra pure liquids, mud, gas, compressed air and vacuum system applications.
PVC pipe fittings include direct connection, tee and cross joint, and the tee is divided into 45 degrees and 90 degrees.
Advantages of PVC pipe PVC chemical pipe, PVC pipe fittings, PVC tube fitting, PVC hose, PVC pipe, PVC hose fitting Glove Industry Co.,Ltd. , https://www.glovemech.com
CNC cutting saw is a computer program control, through the reasonable calculation and the length of the collocation, can production line into the best cutting plan, was carried out on the wood transverse, can greatly improve production efficiency and machining precision, replace manual or traditional machine in production, so as to meet the factory mass production requirements, factories, in order to solve the low efficiency in the process of production, precision error is large, the phenomenon such as difficult to manage.
Â
Precision Panel Saw   CS-4000
Dimension of sliding table
5000*700*980mm
Gross cut capacit
4000mm
Width of cut between saw bailade and rip fence
200mm
Saw blade diameter
400/450mm
Height of cut
110/130mm
Spee of main saw spindel
3500/rpm
Main spindel dimeter
30mm
Main motor
7.5kw
Net Weight
950kg
Gross Weight (with plywood pacakge)
1100kg
overall diamensions
7300*1200*1500mm
cutting 6 meter machine can be customized according to the needs 
Electronic cut-off saw
The electronic truncation saw is mainly used for pallet panel, block, traditional caged wooden case, etc., which can also be used in the production of furniture parts. Compared with the ordinary blanking process, Po industry electronic cutting saw on your timber volume, standardized production, reduce the on-the-job personnel, improve the production efficiency, as well as the rationalization of personnel and material management, production safety, has a prominent advantage. Save cost for you, increase profit, give you rich return!
Truncated saw is computer control, through the reasonable calculation and the length of the collocation, can production line into the best cutting plan, was carried out on the wood transverse, can greatly improve production efficiency and machining precision, replace manual or traditional machine in production, so as to meet the factory mass production requirements, factories, in order to solve the low efficiency in the process of production, precision error is large, the phenomenon such as difficult to manage.
Performance Characteristics:
1, Mitsubishi industrial control, performance more stable;
2, free combination saw cutting size to reduce production waste;
3, The equipment is simple and flexible, one worker can operate;
4, High material rate, reduce the cutting loss in the past;
5, Quick cutting block; high precision; safe and efficient;
6, Safety, the entire operation process to avoid the worker's finger touch the saw blade
Warm prompt:
In order to better serve you and provide you with reasonable equipment suitable for you, we need you to provide some details:
1, Length of raw materials,
2, The maximum height and width of raw materials
3, You need a day's output
We will provide you with the best equipment and considerate service. If you are conveninet, was sincerely invite you to visit our factory to discuss the test.
Â
1. It has good tensile and compressive strength, but its flexibility is not as good as other plastic pipes.
2. Small fluid resistance: the pipe wall of PVC-U pipe is very smooth and has little resistance to fluid. Its roughness coefficient is only 0.009. Its water transmission capacity can be 20% higher than that of cast iron pipe with the same pipe diameter and 40% higher than that of concrete pipe.
3. Excellent corrosion resistance and drug resistance: PVC-U pipe has excellent acid, alkali and corrosion resistance, is not affected by moisture and soil pH, and does not need any anti-corrosion treatment during pipe laying.
4. Good water tightness: the installation of PVC-U pipe has good water tightness whether it is connected by bonding or rubber ring.
5. Anti bite: PVC-U pipe is not a nutrient source, so it will not be eroded by rodents. According to the experiment conducted by the National Health Foundation in Michigan, mice will not bite PVC-U pipes.
6. Performance test: curing time shrinkage splitting strength tensile property peel strength thermal stability application period storage period release of harmful substances.
Wood Pallet Electric Control Cutting Saw
Model NO.: CS4000
Certification: CE, ISO
Customized: Customized
Condition: New
Color: Customized
Trademark: SGM
Transport Package: Plywood Case
Specification: 4000mm
Origin: China
HS Code: 8465910000
 Wood pallet electric control cutting saw, Wood tray automatic production line, electronic intercept saw, CNC cutting saw, cutter, long saw