1. Smoke, if the pump has just begun to run a smoke phenomenon, is normal, if the smoke is not normal for a long time. The solution: smoke shows the pump inlet, including pipes, valves, containers are repaired. Leakage after treatment, the smoke will end. Vortex flowmeter 2. Fuel injection, indicating a large number of leaks outside the air intake, or even the air inlet exposure to the atmosphere. Solution: Seal the pump inlet to run the pump, if not fuel injection, indicating a leak; exhaust valve damage, check the exhaust valve is damaged, replace the bad exhaust valve. T shape rubber stripe is available in the following materials: Viton rubber, Silicone rubber, Fluor silicone rubber, Neoprene rubber EPDM and HBNR. Feature: Mold adaptable, strong processing stability; Good fluidity, good heat endurance; T Rubber Strip,T Rubber Strips,T Shape Rubber Strip,Black T Shape Rubber Strip Shenyang Guide Rubber Products Co.,Ltd , https://www.guiderubber.com
Smooth, flat surface; Low shrinkage rate; Good heat and weather resistance