Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn

<

Model NO.: E6004RTN
Brand: Kwl
Car Make: Many Cars
Seal: Rubber
with Cage: Yes
Trademark: KWL
Transport Package: Industrial Simple Plastic Film Roll Packing
Specification: 41mm x 28mm
Origin: China
HS Code: 8482109000
Model NO.: E6004RTN
Brand: Kwl
Car Make: Many Cars
Seal: Rubber
with Cage: Yes
Trademark: KWL
Transport Package: Industrial Simple Plastic Film Roll Packing
Specification: 41mm x 28mm
Origin: China
HS Code: 8482109000
High reliability has been achieved by special grease and high performance seal. We offers a wide line of bearings to meet the needs of every type of belt and layout...

TensionerT and Idler
This bearing is located in the front of an internal combustion engine. It provides tension to the belt which drives from the crankshaft, to the cam shaft, alternator, air compressor, power steering pump, and water pump. It must handle high temperatures, high-speed rotation, and belt vibration because of contiguity in the engine used in order to make the direction of a belt change. These bearings are designed against different specification from normal deep groove bearings. These bearing are divided roughly into two types and identified by the usage, respectively.

1) Tensioner bearing
Bearing which applies tension to the drive belt, and prevents slack.

2) Idler bearing
Bearing which affects a change in the angle of direction which a belt runs or to adjust contact width with a pulley.
Structure
Sealed groove bearing is usually used and it also has built-in heat-resistant grease, a seal, and retainer and the structure can withstand a temperature change or change of belt tension when the car is running.
1)Tensioner bearing
The rotation center is movable in order to give tension to the belt.

2) Idler Bearing
Unitized with the pulley. 
Product Function
The following are important functions of these indispensable parts for the smooth drive of the belt system.
1)To add initial tension by using the pivot hole and eccentric hole which absorb tension changes in the timing belt where the temperature changes when the engine is running.
2)To prevent any belt-skip, which would cause mis-matching of the valve timing between crank shaft and cam shaft
 
Construction of Tensioner and Idler pully bearing's location in working
 
SKF NO NTN NSK
VKM12380 VKM33002 VKM75006 VKM81004 JPU60-71+JF129 57TB0505B01
VKM12151 VKM71000 VKM75008 VKM81100 JPU60-283+JF485 62TB0813B01
VKM11010 VKM71401 VKM75033 VKM81200 JPU60-216+JF391 50TB0526B01
VKM13244 VKM24212 VKM75044 VKM81201 JPU60-257 62TB0520B01
VKM13100 VKM33004 VKM75100 VKM84000 JPU57-54+JF574 50TB0101
VKM13201 VKM33017 VKM75101 VKM84201 JPU60-215 62TB0629B06
VKM13240 VKM38001 VKM12001 VKM84600 JPU55-54 62TB0629B04
VKM13200 VKM38004 VKM12010 VKM84601 JPU55-002B-1 62TB0103
VKM14000 VKM38012 VKM12012 VKM85000 JPU58-1+JF181 57TB0609B01
VKM13241 VKM71001 VKM12101 VKM23120 JPU60-129+JF337 70TB0603
VKM11000 VKM71002 VKM12630 VKM23122 JPU52-159 50TB0112B01
VKM12200 VKM71003 VKM13200 VKM23130 JPU52-131 56TB0503B01
VKM14100 VKM71005 VKM22242 VKM24213 JPU42-17+JF417 52TB0529B01
VKM14103 VKM71007 VKM22630 VKM24214 JPU50-6+JF265 57TB3705B01
VKM14105 VKM71012 VKM23122 VKM33023 JPU52-157 57TB3701
VKM14201 VKM71014 VKM23244 VKM36022 JPU52-128+JF434 56TB0602B01
VKM14210 VKM71100 VKM26100 VKM36031 JPU52-111+JF434 60TB041B02
VKM14301 VKM71101 VKM36014 VKM76200 X3-JPU60-27 60TB026B02
VKM15210 VKM71200 VKM38004 13504-87301 JPU50-69 60TB062B01
VKM15215 VKM71201 VKM73600 13505-87303 JPU50-66 52TB28028\B01
VKM16000 VKM71202 VKM74501 2108-1006210 5JPU60-124+JF183 60TB0637
VKM16001 VKM71400 VKM75108 2110-1041056 JPU42-18 60TB039B09
VKM16101 VKM71401 VKM75130 2112-1006120 JPU50-80+JF513 60TB039B01
VKM16112 VKM71404 VKM75144 2112-1006135 JPU58-55 60TB048B01
VKM16210 VKM72000 VKM75601 2112-1006135-01 JPU58-015A-3 60TB041B12
VKM22151 VKM72004 VKM75612 B660-12-700F JPU58-58 60TB041
VKM22380 VKM73000 VKM75613 F-212423 JPU60-71+JF121 55TB0520B01
VKM23240 VKM73005 VKM75615 F-224134 JPU60-260+JF397 50TB0524B03
VKM23241 VKM73011 VKM75616 F-226239.2 JPU60-163+JF410 70TB0603
VKM24100 VKM73101 VKM76001 F-229515 JPU55-30 52TB0514B01
VKM24107 VKM73112 VKM76102 F-231137 JPU50-003A-1 54TB0507B01
VKM24210 VKM74001 VKM76103 F-140071 NEP52-019A-1P  
VKM24211 VKM74001 VKM76202 F-125135.05 NEP57.6-002B-1P  
VKM25212 VKM74004 VKM76203 F-123259 NEP62-008B-1P  
VKM26020 VKM74200 VKM77002 F-231338 NEP57-013A-1P  
VKM26101 VKM74201 VKM77300 F-233879 NEP51-OO2B-6  
VKM26102 VKM74501 VKM77401 F-140072 NEP62-011A-1P  
VKM26114 VKM74600 VKM77500 OK247-12-711 NEP52.8-002A-1P  
VKM26123 VKM75000 VKM79001 OK551-12-740A NEP54-002-1P  
VKM26125 VKM75001 VKM80000      
VKM26211 VKM75004 VKM81001      
VKM28000 VKM75005 VKM81002      

 
Five structure type as follows:
 
Nylon Pulley type;
Integrated type;
Steel Pulley with bracket type:
Steel Pulley Type;
Integrated with bracket type;
 
More timing belt tensioner bearings, pulley idler bearings, welcome to contact with us in details.



Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn
Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn
Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn
Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn High reliability has been achieved by special grease and high performance seal. We offers a wide line of bearings to meet the needs of every type of belt and layout...

TensionerT and Idler
This bearing is located in the front of an internal combustion engine. It provides tension to the belt which drives from the crankshaft, to the cam shaft, alternator, air compressor, power steering pump, and water pump. It must handle high temperatures, high-speed rotation, and belt vibration because of contiguity in the engine used in order to make the direction of a belt change. These bearings are designed against different specification from normal deep groove bearings. These bearing are divided roughly into two types and identified by the usage, respectively.

1) Tensioner bearing
Bearing which applies tension to the drive belt, and prevents slack.

2) Idler bearing
Bearing which affects a change in the angle of direction which a belt runs or to adjust contact width with a pulley.
Structure
Sealed groove bearing is usually used and it also has built-in heat-resistant grease, a seal, and retainer and the structure can withstand a temperature change or change of belt tension when the car is running.
1)Tensioner bearing
The rotation center is movable in order to give tension to the belt.

2) Idler Bearing
Unitized with the pulley. 
Product Function
The following are important functions of these indispensable parts for the smooth drive of the belt system.
1)To add initial tension by using the pivot hole and eccentric hole which absorb tension changes in the timing belt where the temperature changes when the engine is running.
2)To prevent any belt-skip, which would cause mis-matching of the valve timing between crank shaft and cam shaft
 
Construction of Tensioner and Idler pully bearing's location in working
 
SKF NO NTN NSK
VKM12380 VKM33002 VKM75006 VKM81004 JPU60-71+JF129 57TB0505B01
VKM12151 VKM71000 VKM75008 VKM81100 JPU60-283+JF485 62TB0813B01
VKM11010 VKM71401 VKM75033 VKM81200 JPU60-216+JF391 50TB0526B01
VKM13244 VKM24212 VKM75044 VKM81201 JPU60-257 62TB0520B01
VKM13100 VKM33004 VKM75100 VKM84000 JPU57-54+JF574 50TB0101
VKM13201 VKM33017 VKM75101 VKM84201 JPU60-215 62TB0629B06
VKM13240 VKM38001 VKM12001 VKM84600 JPU55-54 62TB0629B04
VKM13200 VKM38004 VKM12010 VKM84601 JPU55-002B-1 62TB0103
VKM14000 VKM38012 VKM12012 VKM85000 JPU58-1+JF181 57TB0609B01
VKM13241 VKM71001 VKM12101 VKM23120 JPU60-129+JF337 70TB0603
VKM11000 VKM71002 VKM12630 VKM23122 JPU52-159 50TB0112B01
VKM12200 VKM71003 VKM13200 VKM23130 JPU52-131 56TB0503B01
VKM14100 VKM71005 VKM22242 VKM24213 JPU42-17+JF417 52TB0529B01
VKM14103 VKM71007 VKM22630 VKM24214 JPU50-6+JF265 57TB3705B01
VKM14105 VKM71012 VKM23122 VKM33023 JPU52-157 57TB3701
VKM14201 VKM71014 VKM23244 VKM36022 JPU52-128+JF434 56TB0602B01
VKM14210 VKM71100 VKM26100 VKM36031 JPU52-111+JF434 60TB041B02
VKM14301 VKM71101 VKM36014 VKM76200 X3-JPU60-27 60TB026B02
VKM15210 VKM71200 VKM38004 13504-87301 JPU50-69 60TB062B01
VKM15215 VKM71201 VKM73600 13505-87303 JPU50-66 52TB28028\B01
VKM16000 VKM71202 VKM74501 2108-1006210 5JPU60-124+JF183 60TB0637
VKM16001 VKM71400 VKM75108 2110-1041056 JPU42-18 60TB039B09
VKM16101 VKM71401 VKM75130 2112-1006120 JPU50-80+JF513 60TB039B01
VKM16112 VKM71404 VKM75144 2112-1006135 JPU58-55 60TB048B01
VKM16210 VKM72000 VKM75601 2112-1006135-01 JPU58-015A-3 60TB041B12
VKM22151 VKM72004 VKM75612 B660-12-700F JPU58-58 60TB041
VKM22380 VKM73000 VKM75613 F-212423 JPU60-71+JF121 55TB0520B01
VKM23240 VKM73005 VKM75615 F-224134 JPU60-260+JF397 50TB0524B03
VKM23241 VKM73011 VKM75616 F-226239.2 JPU60-163+JF410 70TB0603
VKM24100 VKM73101 VKM76001 F-229515 JPU55-30 52TB0514B01
VKM24107 VKM73112 VKM76102 F-231137 JPU50-003A-1 54TB0507B01
VKM24210 VKM74001 VKM76103 F-140071 NEP52-019A-1P  
VKM24211 VKM74001 VKM76202 F-125135.05 NEP57.6-002B-1P  
VKM25212 VKM74004 VKM76203 F-123259 NEP62-008B-1P  
VKM26020 VKM74200 VKM77002 F-231338 NEP57-013A-1P  
VKM26101 VKM74201 VKM77300 F-233879 NEP51-OO2B-6  
VKM26102 VKM74501 VKM77401 F-140072 NEP62-011A-1P  
VKM26114 VKM74600 VKM77500 OK247-12-711 NEP52.8-002A-1P  
VKM26123 VKM75000 VKM79001 OK551-12-740A NEP54-002-1P  
VKM26125 VKM75001 VKM80000      
VKM26211 VKM75004 VKM81001      
VKM28000 VKM75005 VKM81002      

 
Five structure type as follows:
 
Nylon Pulley type;
Integrated type;
Steel Pulley with bracket type:
Steel Pulley Type;
Integrated with bracket type;
 
More timing belt tensioner bearings, pulley idler bearings, welcome to contact with us in details.



Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn
Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn
Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn
Tensioner Pulley Tensioner Bearing Auto Bearings Auto Parts E6004rtn

Coupling for High Pressure Cleaning Machine with Brass, Stainless Steel, Iron material. Fittings include welding, card sets and flared,
Male Coupling Connector Type:
End through connector, straight connectors, tees, elbows, with live nut joints, Swivel joints, plug, transition joints
Composed of dual ferrule fittings: Before the snap ring, after the snap ring nut
Materials commonly used are stainless steel and carbon steel
NPT, PT, G is the pipe thread.
NPT is National (American) Pipe Thread abbreviation belong American standard tapered pipe thread 60 degree, for North America. National standards can be found GB / T12716-1991
Pipe Thread PT is an abbreviation, is 55 degrees sealing cone pipe thread, is a Whitworth thread family, more for Europe and the Commonwealth countries. Commonly used in water and gas pipe industry, defined as 1:16 taper. National standards can be found GB / T7306-2000
G is 55 degrees non-thread sealing pipe thread, is a Whitworth thread family. G represents a threaded barrel mark. National standards can be found GB / T7307-2001
Also thread 1 / 4,1 / 2,1 / 8 mark refers to the thread diameter in inches.
Insiders usually points to refer to the thread size, one inch equals 8 points, 1/4-inch is 2 points, and so on.
G is the pipe thread collectively (Guan), divided into 55, 60 degrees are functional, commonly known as a round tube. That thread processing is made by a cylindrical surface.
ZG commonly known as the funnel, that thread processing by a conical surface made of pipe joints in general are like this, the old domestic thread standard male thread Rc labeled as R

Fitting

Male Coupling,Brass Male Fitting,45 Degree Brass Couplers,Stainless Steel Coupling

NINGBO HAISHU OMWAY MACHINERY FACTORY , https://www.cleantheway.com