Quenched And Tempered Steel Bar
Quenched and tempered steel bar is produced by quenching and tempering which is one kind of heat treatment to get high mechanical properties and hardness. Our advantages and more services of quenched and tempered steel bar includes:
1) Wide range of diameters from 10mm to 100mm
2) Customized Length from 100mm to 12000mm
3) Good surface roughness: 0.4um to 1.5um
4) Good straightness: 0.5mm/m to 2mm/m
5) Good roundness: 80% of diameter tolerance
6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11
7) Matched further processing: Grinding, polishing, straightening
8) Anti-rusty package
9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing
10) Fast delivery time
quenched and tempered steel, quenched and tempered steel bar,42CrMo4 qt steel bar,qt steel bar,4140 Q&T steel bar SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdbrightsteelbar.comMetal detector splitter
 Metal SeparatorApplication:
Metal separator is used for the detection of industrial products of iron, stainless steel, copper, aluminum and all other metal impurities, such as in the food, plastics, pharmaceutical products production process,it's easy to mix metal impurities, not only affect the quality of products, also do a lot of harm to consumers.
During the plastic molding process, thin metals inside the raw materials always present invisible hidden hazards to our molding equipment, for example, screws of molding machines are abnormally worn and torn and nozzles are blocked, etc. Most of those hazards are caused by metals existing in the raw materials. HADRDEGA also has perfect solution for hazards of that field
 Technical parameters:
MODEL
MATERIAL INLET DIAMETER
Production output
(processing capacity)
Detection accuracy
BH-20
20mm
100L/hr
Fe:0.2mm SUS:0.5mm Cu/Al: 0.35mm
BH-30
30mm
400L/hr
Fe:0.3mm SUS:0.7mm Cu/Al:0.45mm
BH-40
40mm
1000L/hr
Fe:0.4mm SUS:0.75mm  Cu/Al:0.5mm
BH-46
46mm
2000L/hr
Fe:0.5mm SUS:0.8mm  Cu/Al:0.55mm
BH-50
70mm
5000L/hr
Fe:0.8mm SUS:1.4mm  Cu/Al:0.85mm
BH-60
100mm
12000L/hr
Fe:1.2mm SUS:2.0mm  Cu/Al:1.35mm
BH-70
150mm
30000L/hr
Fe:1.8mm SUS:2.2mm  Cu/Al:2.1mm
Main Feature:
(1) The rapid separation of various metals in plastic materials, including "ferrous" and "non ferrous"
(2) High sensitivity, small metal particles such as 0.4mm, which can be adjusted according to the actual production
(3) Full automatic operation, saving manpower
(4)Each package of plastic processing time is about 4 minutes
What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency
Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.
Â
Metal detector splitter
 Metal SeparatorApplication:
Metal separator is used for the detection of industrial products of iron, stainless steel, copper, aluminum and all other metal impurities, such as in the food, plastics, pharmaceutical products production process,it's easy to mix metal impurities, not only affect the quality of products, also do a lot of harm to consumers.
During the plastic molding process, thin metals inside the raw materials always present invisible hidden hazards to our molding equipment, for example, screws of molding machines are abnormally worn and torn and nozzles are blocked, etc. Most of those hazards are caused by metals existing in the raw materials. HADRDEGA also has perfect solution for hazards of that field
 Technical parameters:
MODEL
MATERIAL INLET DIAMETER
Production output
(processing capacity)
Detection accuracy
BH-20
20mm
100L/hr
Fe:0.2mm SUS:0.5mm Cu/Al: 0.35mm
BH-30
30mm
400L/hr
Fe:0.3mm SUS:0.7mm Cu/Al:0.45mm
BH-40
40mm
1000L/hr
Fe:0.4mm SUS:0.75mm  Cu/Al:0.5mm
BH-46
46mm
2000L/hr
Fe:0.5mm SUS:0.8mm  Cu/Al:0.55mm
BH-50
70mm
5000L/hr
Fe:0.8mm SUS:1.4mm  Cu/Al:0.85mm
BH-60
100mm
12000L/hr
Fe:1.2mm SUS:2.0mm  Cu/Al:1.35mm
BH-70
150mm
30000L/hr
Fe:1.8mm SUS:2.2mm  Cu/Al:2.1mm
Main Feature:
(1) The rapid separation of various metals in plastic materials, including "ferrous" and "non ferrous"
(2) High sensitivity, small metal particles such as 0.4mm, which can be adjusted according to the actual production
(3) Full automatic operation, saving manpower
(4)Each package of plastic processing time is about 4 minutes
What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency
Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.
Â
Metal Detector for Plastic Raw Material
Model NO.: BH-50
Application Principle: Gravity Fall
Weight: About 40kg
Application Field: Food, Pharmaceutical, Plastic, Chemical, Toy Indus
Warranty Period: 12 Months
Trademark: HADRDEGA
Transport Package: Wooden Case
Specification: BH-20----BH-70
Origin: China
HS Code: 9022199090
Model NO.: BH-50
Application Principle: Gravity Fall
Weight: About 40kg
Application Field: Food, Pharmaceutical, Plastic, Chemical, Toy Indus
Warranty Period: 12 Months
Trademark: HADRDEGA
Transport Package: Wooden Case
Specification: BH-20----BH-70
Origin: China
HS Code: 9022199090