Incorrect actions that affect the life of LED advertising vehicles: 1, often drive will encounter some very strange driver of a variety of operating conditions. When some drivers of led mobile advertising vehicles were not even stepping on the clutch when they were in a hurry, he began to hang up, and this way of operation would not only affect the accuracy of the connection. And in such operations, it has caused serious damage to the gearbox of led mobile advertising vehicles . 2, led mobile advertising vehicle drivers are more accustomed to using the left foot full step on the clutch above, all thought that doing so is a perfect strategy, can be led mobile advertising vehicle control better. In fact, your operation method is to cause very good damage to the clutch plate. Especially when the speed of the LED mobile advertising vehicle runs faster, if such a continuous semi-clutching condition will accelerate the wear of the clutch plate. 3. When there are some roads and grooves on the road, it is good to reduce the speed of led mobile advertising vehicles in advance. If it is directly so that it will leap over, not only its own ride comfort will not be very good, but also Injured to the suspension, shock absorbers and springs. I have seen many drivers driving past this type of road. All of them are gone. They did not consider the situation of some parts of the vehicle. 4, led mobile advertising vehicle drivers often frequent operation of the vehicle combination switch, long-term frequent operation of the combination switch will cause the risk of early damage, when the combination switch in the moment of connection, through the switch contacts The current doi is much higher than when it is used normally, and when the semi-detached combination is engaged, the spark is likely to burn the contacts. 5. When the air temperature is relatively low, the water spray nozzle of the led mobile advertising vehicle is frozen. The driver will not forcibly spray glass water. This will only destroy the water pump. The best practice is to start the led mobile advertising vehicle for a period of time. After waiting for the temperature of the vehicle to come up, the ice of the frozen water spout of the led mobile advertising vehicle will gradually melt out. Flat Idler Pulley,Idler Pulley,Flat Belt Idler Pulley,V Belt Idler Pulley Taizhou Chenhui Machinery Manufacturing Co., Ltd , https://www.chenhuipulley.com