In-depth analysis: green lighting terminal channel model innovation

<

In order to further dialysis the green lighting industry marketing channels and better promote channel laying and improvement, Zhou Tingrui, the general manager of Sandu Marketing Consulting Co., Ltd., recently conducted a deep analysis on the construction of green lighting terminal channels. Government subsidies should be treated equally. Generally speaking, the current marketing methods and channels of fluorescent lamps are relatively mature, but LED lighting products still have the phenomenon of “two hot and cold”. "Two hot" is the government's heat and the manufacturer's heat; "intermediate cold" means the consumption is cold. At present, the government strongly supports the development of the LED industry, and manufacturers are also pushing. Many leading LED companies have invested heavily in this field. However, in the middle of the distribution channels, dealers seem to have insufficient confidence in LED lighting products. The main reason is that the cost of LEDs is too high, there is a problem of saving energy and not saving money. Consumers still need a certain process. In terms of LED technology, heat dissipation and light The problem of fading has not been solved well, and the circulation channel lacks confidence in the LED lighting product market. In the past two years, the National Development and Reform Commission has formulated a roadmap for eliminating inefficient lighting products (incandescent lamps), promoting high-efficiency energy-saving lighting products, and further promoting China's green lighting projects. According to the Interim Measures for the Administration of Financial Subsidy Funds for National High-Efficiency Lighting Products Promotion, the state financial subsidies focus on supporting high-efficiency lighting products to replace incandescent lamps and other inefficient lighting products in use, including the popularization of self-ballasted fluorescent lamps for general lighting, and three-color double-ended Straight tube fluorescent lamps (T8, T5 type) and other electric light source products, semiconductor (LED) lighting products and necessary supporting ballasts. The government's series of energy-saving subsidies have allowed some well-known enterprises and leading enterprises to enjoy energy-saving subsidies, but most SMEs cannot obtain such subsidies, and the market situation is quite severe. As far as the solution is concerned, the government should regard energy-saving subsidies as a common behavior, treat all quality-stricken enterprises in the industry equally, and should not regard the size of the enterprise as the only criterion for determining whether to subsidize. The use and promotion of LED lighting products should not be just industry behavior, and all aspects of society should be involved in the promotion and market cultivation of LED lighting products. In developed countries in Europe and America, the promotion of LED lighting products has been very successful, and the EU has taken the lead in government subsidies for the use of LED lighting products. It is reported that some developed provinces in China, such as Guangdong and Jiangsu, will soon adopt measures to impose mandatory use of LED products in commercial places (hotels, hotels). All in all, the problems encountered in the marketing of green lighting products need to be promoted by the whole society, so that green lighting can be widely applied and realized, and contribute to energy conservation and environmental protection. The marketing model is appropriate. The marketing model of the best lighting industry is quite special. The common marketing models in other industries have appeared in the lighting industry, which is determined by the diversity of lighting industry products, channels and marketing models. Various marketing models have their practicality, value of use and rationality in their existence under various specific circumstances and conditions. In the lighting industry, there are many different channel models, but in general, there is still a necessary principle - the right one is the best, and it should be selected according to the market target, product type, and enterprise resource allocation. Establish a suitable and effective channel model. Enterprises and distributors need innovative channel cooperation mode The development of China's lighting and lighting industry is still not fully mature today. As an important part of the sales process, dealers have been singing a one-man show, facing the consumer sector alone. At present, most companies in the industry can only provide products for dealers, but not for dealers. As a result, dealers in the lighting industry have taken on more functions and pressures than other mature industries. In addition, because the dealers occupy a dominant position in the sales process of the products, the profit requirements for their own links are relatively high, which inevitably creates a higher price threshold for the excellent products to be distributed to the consumer. These problems depend on the further maturity of the industry, through the innovative channel cooperation model, through the benign cooperation between the company and the distributors one by one. Successful promotion relies on a successful marketing strategy For overall marketing, promotion is just one of the marketing topics. In theory, there is no successful marketing case without a successful marketing strategy. If the marketing strategy and purpose are not correct, the greater the promotion, the greater the destructive power. There are many successful marketing cases in China's lighting industry. For example, NVC Lighting joins European kitchen cabinets, Dongpeng ceramics, nature flooring, red apple furniture and Midea's five major home furnishing giants to create "Champion Alliance", in brand marketing, customers. The service and other aspects of comprehensive cooperation, and jointly promote the cross-border upgrade of the home industry have received good results; the Australian sales channel encountered bottlenecks at the end of 2007, the marketing team after careful analysis of competitors and themselves, proposed "Red Jin China "Strategy and effective promotion and implementation in a series of activities not only promoted the channel consolidation, but also formed an effective pull in the terminal... These successful marketing cases are worth learning from the green lighting industry, and Based on this, we continue to innovate. At present, in the LED lighting industry, this trend is very obvious, and this is the performance of the industry's continuous development.

Pulverizer Machine

Pulverizers are machines that pulverize large solid materials to the required size.

According to the size of the crushed material or the crushed material, the mill can be divided into coarse crusher, medium crusher, fine mill and superfine mill. There are four kinds of external forces applied to the solid in the grinding process: pressing, cutting, impact and grinding. Press rolling is mainly used in coarse and medium crushing, suitable for the crushing of hard materials and bulk materials. Shearing is mainly used in fine crushing, suitable for the crushing of ductile materials. Impact is mainly used in medium crushing, fine grinding, ultrafine grinding, suitable for crushing brittle materials. Grinding mainly in fine grinding, ultrafine grinding, suitable for small pieces and fine particles.

The crusher makes use of the high speed relative motion of the movable tooth plate and the fixed tooth plate, so that the crushed object can be crushed by the comprehensive action of tooth impact, friction and the impact between the materials. The crusher is suitable for crushing Chinese herbs, precious medicinal materials, ores and chemical raw materials in small batches in various varieties, alloys, metallurgy, geology, scientific research and other units.

The pulverizer machine has the advantages of simple structure, solid, stable operation and good crushing effect. The pulverized material can be discharged directly from the grinding chamber of the main machine. The particle size can be obtained by replacing the mesh screen with different aperture. The powder collecting chamber adopts the completely closed silencer structure, which can effectively reduce the working noise. In addition the machine is all stainless steel. The inner wall of the casing is machined to achieve smooth surface, which changes the phenomenon of rough inner wall and powder accumulation of the previous models, so that the production of drugs, food, chemical industry and so on is more in line with national standards and meet the requirements of GMP.

Pulverizer Machine,Crushing Machine,Milling Machine,Grinding Mill, Grinding Machine

JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.xuantengmachine.com