High Quality PTFE Coated Fiberglass Mesh Conveyor Belt

<

Model NO.: kc120
Origin: China
HS Code: 70195900

                                  PTFE mesh conveyor belt series

We select advanced imported loom,using high-quality imported glassfiber or Kevlar as basic weaving material, coated with excellent PTFE resin to make it into various PTFE mesh conveyor belts.

 High Quality PTFE Coated Fiberglass Mesh Conveyor Belt


Features of PTFE conveyor belts:
1. High temperature resistance--It can continuously work under-140 to 260ºC, max resist high temperature up to 360ºC
2. Air permeability--It can avoid wasting heat and improve drying efficiency.
3. Chemical resistance--It can resist all most of chemical medicines.
4. Non-Sticky--It can easily remove all kinds of adhesives such as resin, paint and chemical medicines.
5. Good flex fatigue resistance--It has high tensile strength and excellent flex fatigue resistance. It's better for small wheels

 High Quality PTFE Coated Fiberglass Mesh Conveyor Belt



Applications:
1.Drying machine for non-woven textile, textile printing, silk- printing and dyeing machine.
2.Shrinking machine for garment fabric, high-frequency and UV dryer.
3.Conveyor belt for hot-air dryer, various of food baking, quick-frozen machines.
4.Oiling machine for paper glazing and waxing, plant engineering.
5.Seperating sheet for hardboard production etc.

High Quality PTFE Coated Fiberglass Mesh Conveyor Belt

 
Model material mesh size Thickness weight Temp resistance Max Width Tensile Strength
6001 fiberglass 1x1mm 0.5mm 370g/m² -70-260ºC 4000mm 310/290N/cm
6002 fiebrglass  2x2mm 0.7mm 450g/m² -70-260ºC 4000mm 350/310N/cm
6004 fiberglass 4x4mm 1.0mm 400g/m² -70-260ºC 4000mm 390/320N/cm
6004B fiberglass 4x4mm 1.0mm 450g/m² -70-260ºC 4000mm 390/320N/cm
6007 fiberglass
+Kevlar		 4x4mm 1.2mm 600g/m² -70-260ºC 4000mm 895/370N/cm
6008 fiberglass 4x4mm 1.0mm 585g/m² -70-260ºC 4000mm 395/370N/cm
6008B fiberglass 4x4mm 1.0mm 585g/m² -70-260ºC 4000mm 395/370N/cm
6013 fiberglass 10x10mm 1.2mm 450g/m² -70-260ºC 4000mm 360/300N/cm
6015 fiberglass 0.5x1mm 0.5mm 420g/m² -70-260ºC 4000mm 310/290N/cm
6025 fiberglass 2*2.5mm 0.9mm 600g/m² -70-260ºC 3000mm 390/320N/cm

High Quality PTFE Coated Fiberglass Mesh Conveyor Belt

High Quality PTFE Coated Fiberglass Mesh Conveyor Belt

 

WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.

WNS Steam Boiler

WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com