Activated Alumina,Activated Alumina Balls,Alumina Desiccant,Alumina Adsorbent Ningbo Cijie Chemical Equipment Co., Ltd. , https://www.zjchemicaltower.com
1. The maximum temperature resistance of the insulating material: 250° C
2. The highest service temperature: 200° C-250° C
3. Insulation resistance: ≥ 5 MΩÂ
4. Compressive strength: 1500V/5s
5. Power deviation rate: +5%
6. High voltage resistance: > 5KV
7. Maximum 1000mm× 8000mm, minimum 20mm× 20mm, thickness1.5mm (thinness 0.8mm, ----thickness 4mm)
Lead wire length: Standard 200mm, in case that the above dimensions are exceeded.
Spare Parts:Â
100K thermistor
3M Adhesive
Overheat Protection
Micro Thermostat
Digital Temperature Controller
Manual Temperature Controller
If you want to add the aboved spare parts, please advise.Â
Â
Temperature Rating
400 ° F ( 204 ° C ) maximum operating
Size/Shape Limitations
Maximum width of 48 inches , no maximum length
Thickness
~0.06 inch(Single-Ply)~0.12 inch(Dual-Ply)
Voltage
Any AC or DC
Wattage
Customer specified(Normal maximum of 5 watts of 5 watts per square inch)
Power lead wire
Silicone rubber, SJ Power Cord, or Teflon insulated stranded wire
Attachment
Hooks, lacing eyelets, Or Velcro closure. Temperature control(Thermostat)
Â
Â
Description1. Silicon Rubber Heating Pad/Sheet has advantages of thinness, lightness, sticky and flexibility.
2. It can improve heat transfer, accelerate warming and decrease power under the process of operation.
3. They are heating fast and thermal conversion efficiency high.Features:
(1) Heating fast and long time using
(2) Flexible and customization
(3) Waterproof and non-toxic (Waterproof grad:IP68)
Â
Before purchasing, Please confirm the size first ( Iength*wide*thickness) Many thanks
Â
Technical Parameters:Â
1. The maximum temperature resistance of the insulating material: 250° C
2. The highest service temperature: 200° C-250° C
3. Insulation resistance: ≥ 5 MΩÂ
4. Compressive strength: 1500V/5s
5. Power deviation rate: +5%
6. High voltage resistance: > 5KV
7. Maximum 1000mm× 8000mm, minimum 20mm× 20mm, thickness1.5mm (thinness 0.8mm, ----thickness 4mm)
Lead wire length: Standard 200mm, in case that the above dimensions are exceeded.
Spare Parts:Â
100K thermistor
3M Adhesive
Overheat Protection
Micro Thermostat
Digital Temperature Controller
Manual Temperature Controller
If you want to add the aboved spare parts, please advise.Â
Â
Temperature Rating
400 ° F ( 204 ° C ) maximum operating
Size/Shape Limitations
Maximum width of 48 inches , no maximum length
Thickness
~0.06 inch(Single-Ply)~0.12 inch(Dual-Ply)
Voltage
Any AC or DC
Wattage
Customer specified(Normal maximum of 5 watts of 5 watts per square inch)
Power lead wire
Silicone rubber, SJ Power Cord, or Teflon insulated stranded wire
Attachment
Hooks, lacing eyelets, Or Velcro closure. Temperature control(Thermostat)
Â
Â
Description1. Silicon Rubber Heating Pad/Sheet has advantages of thinness, lightness, sticky and flexibility.
2. It can improve heat transfer, accelerate warming and decrease power under the process of operation.
3. They are heating fast and thermal conversion efficiency high.Features:
(1) Heating fast and long time using
(2) Flexible and customization
(3) Waterproof and non-toxic (Waterproof grad:IP68)
Â
Before purchasing, Please confirm the size first ( Iength*wide*thickness) Many thanks
Â
Heatfounder Top Brand Temperature Control Silicone Heating Plate
Model NO.: Customized Silicon Rubber Heater
Lead Wire of Silicone Heating Pad: 20cm, 1m, 2m or You Need
Silicone Rubber Heating Pad Power: 15W, 30W,100W, 150W, 750W, 2000W, etc
Principle: Electric Heater
Style: Pad
Thcikness: 1.5mm(Standard) or 0.75X
Power Lead Wire: Silicone Rubber
Temperature Rating: 400 ° F ( 204 ° C ) Maximum Operating
Trademark: Heatfounder
Transport Package: Plastic Bag and Carton
Specification: customized
Origin: Shanghai
Model NO.: Customized Silicon Rubber Heater
Lead Wire of Silicone Heating Pad: 20cm, 1m, 2m or You Need
Silicone Rubber Heating Pad Power: 15W, 30W,100W, 150W, 750W, 2000W, etc
Principle: Electric Heater
Style: Pad
Thcikness: 1.5mm(Standard) or 0.75X
Power Lead Wire: Silicone Rubber
Temperature Rating: 400 ° F ( 204 ° C ) Maximum Operating
Trademark: Heatfounder
Transport Package: Plastic Bag and Carton
Specification: customized
Origin: Shanghai
Technical Parameters:Â