Corn Thresher,Corn Sheller,Hand Corn Sheller,Corn Sheller Machine Hunan Xinta Machinery Manufacturing Co., Ltd. , https://www.china-agricultural-product.com
1ã€Before setting up, check the sound. Lift the wheel with a rope and tap the wheel. The sound should be crisp and free from vibrato or murmur.
2. The diameters of the two flanges must be equal so that the grinding wheel does not break due to bending stress. The minimum diameter of the flange should not be less than 1/3 of the diameter of the grinding wheel, and should not be less than 2/3 in the absence of a protective cover.
3, between the grinding wheel and the flange must be placed on rubber, felt and other elastic materials to increase the contact surface, so that the force evenly. After being clamped, after static balance, the grinding wheel should be tested at the maximum speed for 5 minutes before it can be used officially.
4. Adjustment method of the static balance of the grinding wheel of the CNC grinding machine When using the manual operation to adjust the static balance of the grinding wheel, the balancer, the balancer, the balancer, and the leveler must be used.
China Machine Tool Network Xiaobian reminds that the following points should be noted:
1) The balancer should be horizontal, especially vertical.
2) Shake off the coolant in the grinding wheel.
3) The grinding wheel should be fastened, and the flange and counterweight should be washed.
4) The inner cone of the flange of the grinding wheel must be tightly fitted with the balancer mandrel, and the mandrel should not be bent.
5) After balancing the grinding wheel, the balance block should be fastened.
6) The balancer is preferably knife-edge type, because the contact surface with the mandrel is small, reflecting more sensitive.
Grinding machine in the process of what precautions?
First, CNC Grinding Machine Grinding Wheel Installation and Repair Integer Grinding Machine Grinding Wheel Installation and Dressing Grinding Wheel Installation The general grinding wheel installation adopts flange mounting. The following points should be noted when installing: