Future forecast of drying equipment in the next few years

<

According to the forecast of China General Machinery Drying Equipment Industry Association, in the next few years, the demand for drying equipment in China's chemical industry will reach the Foodjx guide: around 3,000 sets (sets); the annual demand for pharmaceutical drying equipment will reach around 3,000 sets (sets); The annual demand for drying equipment used in agriculture, forestry, food, light industry and other industries is expected to reach around 5,000 (sets). Dryer equipment is an indispensable production factor and production equipment in the era of modern agricultural mechanization. It is also of great significance for building modern agricultural civilization. It is understood that the dryer consists of various parts and components, a large part of which comes from the casting industry, these castings have an important role in the production of dryers.

It is reported that China's current development of the dryer equipment industry has achieved certain results and continues to develop steadily. China's dryer production has achieved good results in the world, although this news shocked the people in the dryer industry, but this is just the result of the dryer industry in China on the scale of the industry, which does not explain the drying of our country. The development of the dryer industry has been impeccable. On the contrary, its development still faces some constraining factors, among which, the backwardness of the technological level of the dryer parts in China is a major bottleneck. Only by breaking this bottleneck, the dryer industry in China will be able to achieve substantive Breakthroughs and rapid development in steady development. In order to achieve the development of the dryer casting industry itself, and for the sake of China's industrial development plan, China's dryer casting industry should break through the bottleneck encountered by the dryer castings, and continuously promote the development level of the dryer industry.

At present, the domestic market share of drying equipment in China has reached more than 80%. It is expected that during the “10th Five-Year Plan” period, the domestic market share of domestic drying equipment will reach over 90%. At present, the existing problems are highlighted by two areas: regional concentration and weak technological innovation.

Distribution of dryer equipment companies Most of the production companies in the dryer equipment industry in China are gradually derived from the early enterprises in the industry. The geographical location is relatively concentrated, and the personnel structure is seriously flawed. So far, companies are mainly distributed in Jiangsu, Zhejiang, Shanghai, Liaoning and Heilin. Enterprises in these regions account for almost 50% of the total number of industries. In stark contrast to this, at present there are still some areas in China Drying equipment manufacturers. Intense competition in the industry, some companies focus on immediate interests, the lack of system development ideas, the overall quality of the slow increase, seriously hampered the normal development of the industry.

Dryer equipment technology development capability is not strong After the reform and opening up, especially in recent years, China's economic growth potential has been effectively released, the supply and demand relationship formed by the shortage economy has undergone a fundamental change, the buyer's market is initially formed. Under the pressure of the buyer's market, some companies are chasing the market rather than looking for and exploiting the market. The company's energy is focused on the products that have more market demand and mature in the near future. Therefore, in the oven, vibrating fluidized bed, spray dryer and other products, the manufacturers are more concentrated and the competition is fierce. There are fewer companies engaged in the development of drying equipment in the industry. The improvement of new products and the introduction of new products mainly rely on mutual imitation.

Dryer equipment development proposal

Adopt advanced technology to improve product quality There is still a certain gap between China's drying equipment technology and the developed countries in the world. At present, medium and low-tech products dominate the market. After China's accession to the WTO, there will be more international counterparts entering the domestic market. With the ever-increasing international competition, we will face enormous pressure from competition. The world-famous drying equipment manufacturers, such as the Danish Nilu Group, Japan's Okawara Corporation, have already established branch offices in China to seize the Chinese market. As the process of economic globalization accelerates, more multinational companies will shift their goals to the Chinese market. The increasingly fierce competition requires that our enterprises must improve their product quality through technological advancement, the absorption of advanced foreign technology, and independent innovation. The idea of ​​product development should focus on the large-scale equipment, the degree of automation of control, the surface treatment quality of equipment, and the selection of corrosion-resistant materials, and develop multi-functional combined machines to promote the continuous extension of the product life cycle. Industry associations should organize more enterprises to participate in international technical exchanges, absorb the latest technological achievements, and accelerate the improvement of the industry-wide technology level.

Adjusting the corporate structure and cultivating the core competitiveness of enterprises The characteristics of the dry industry in China are that the enterprises are not large, weak, specialized, and unrefined, and the quantity is large while the overall quality is not high; most enterprises are lagging behind in management and do not achieve the appropriate economies of scale. They should pass the industry associations. Conduct guidance and coordination to change the situation of blind development. Relatively concentrated enterprises in Jiangsu, Zhejiang, and Shanghai can consider the use of joint ventures, cooperation, and acquisitions to migrate to the central and western regions in search of a broader space for corporate survival and development. Enterprises in the industry should take the road of strong alliances and develop large companies and enterprise groups with strong technical strength, well-known brands, and independent intellectual property rights in the industry. Form your own specialty products and special services.

China's drying equipment manufacturers have low innovation capabilities. There are few companies that can introduce new technologies and new products with independent intellectual property rights. This is an important reason for the slow development of drying technology in China. At present, there are dozens of universities and research institutes in China that are engaged in research and development of drying technology. They are distributed in the east, west, north and south of China, but most of the knowledge achievements have not been effectively translated into actual productivity. Enterprises must become the main body of technological innovation and should directly cooperate with these universities and research institutes in various forms to make resources be reasonably allocated and utilized, and to effectively cultivate and develop the innovative capabilities of enterprises.

Prospects of the dryer equipment industry The focus of the dryer equipment industry competition in the future will be mainly on product quality, technical level, after-sales service and price. In the type of drying equipment, atmospheric pressure drying equipment and vacuum drying equipment will be mainly used, and users in other special fields such as far-infrared drying equipment and microwave drying equipment will gradually expand the number of applications. In terms of drying of foods and pharmaceuticals, the demand for larger-scale equipment in vacuum freeze-drying equipment will increase, and the demand for equipment with functional combinations (such as granulation-drying, drying-filtration) will increase, and high-automated drying. Equipment will be welcomed in some application areas. In addition, the appearance quality of the dryer equipment will be more and more important, and the corrosion resistance and reliable performance of the corrosive material drying equipment will be given special attention by users.

At present, China's dryer equipment industry has begun to enter a more mature stage of development, can better meet the actual needs of users in various fields, while the price is only 1/3 of the same foreign products, which makes China's dryer equipment in In the market competition, there is a clear price advantage over imported equipment. On the other hand, due to the large volume of drying equipment, most of them involve on-site installation, commissioning, and after-sales service. Therefore, for domestic users, the use of domestically produced equipment is more preferable than importing. The equipment is more convenient. As far as the international market is concerned, after China's accession to the WTO, it will be more conducive to expanding its exports of drying equipment. At present, the major export products of drying equipment in China are vacuum drying equipment, vibration drying equipment, drying equipment for small and medium grain, food, and agricultural and forestry native products. The annual export volume exceeds 100 units, and the main export areas are Southeast Asia and other developing countries. Has opened the door to Europe and the United States market. At present, China's export of dryer equipment accounts for less than 5% of the total domestically produced drying equipment. Experts estimate that the proportion of dryer equipment exports in the total domestic dryer equipment will reach the “10th Five-year Plan” period. More than 10%.

In the international competition, the major competitors of China's dryer equipment manufacturers are Denmark, Switzerland, the United Kingdom, Germany, the United States, and Japan. Comparing with competitors, the advantage of dryer equipment in China is low price. The main disadvantage is that the degree of automatic control, appearance quality, completeness and functional combination of the product need to be further improved.

Therefore, domestic dryer equipment manufacturers should take full advantage of China's accession to the WTO, strengthen technical exchanges with foreign countries, learn from the length of foreign advanced drying equipment, and accelerate the improvement of China's drying equipment, automatic control, appearance quality, complete sets of features and functional combinations Sex, reduce the gap with foreign products, improve the trust of our products among users, so that China's dryer equipment not only in the domestic market, but also in foreign markets can also occupy a place.

The types of dryer equipment that China has produced now are increasing, the scope of application has been continuously expanded, the level and quality of products are rapidly increasing, and the market competitiveness is constantly increasing. In particular, the Chinese government has issued various policies to support the export of products and created excellent external conditions for domestic drying equipment manufacturers. This shows that the development prospects of the dryer equipment industry in China are promising.

Aluminum Epoxy Coated Foil

Aluminum Epoxy Coated Foil is Aluminum Foil coated with epoxy lacquer.The frequently used color is yellow,some clients may use black color as well.Gold epoxy coated finstock is normally used in air conditioning.The coating helps in corrosion resistance.The aluminum foil used in coating is either alloy 8011 or alloy 1060,1050 or 1100.The lacquer can be coated on one side or two sides both and the weight of coating is depending on the thickness of the foil.If you choose our ready coil,MOQ can be one coil.Turst in harmony,we care what our clients care.

Airfin 100 gold,Gold epoxy coated finstock, Gold epoxy coated finstock for air conditioning,Aluminum Epoxy Coated Foil

Trumony Aluminum Limited , https://www.trumonyalu.com