Why Choose US

We test leakage of each roll before braiding, then we cut 300mm and crimp it to test
burst pressure after brading.

We use CNC Lathes Machine for end fittings production. Machine system, knife and inspection
tools are all imported from Japan.

We use Techmaflex Crimping Machine which is imported from France. This machine has
accurate and stable performance for crimping because it is produced for PTFE hose crimping only.

  http: www.junyuan-group.com    www.xbvalve.net

Stainless Steel Solid Wire can be used in both inert gas shielded welding (TIG, MIG welding). Can also be used for submerged arc welding. Stainless steel MIG welding can achieve high efficiency welding, and easy to achieve welding automation, widely used in surfacing and sheeting and other fields. MIG welding wire chemical composition and TIG wire, but for some stainless steel varieties, there is a higher SI MIG welding wire, such as ER308, ER309 welding wire corresponding to the ER308Si, ER309Si, due to Si up to about 0.8% Reduces the surface tension of the droplet metal, making the droplet particles thinner, making it easier to achieve excessive ejection, making the arc more stable. At the same time can improve the wetting of molten metal, so that the weld ripple beautiful, not easy to produce not penetration, slag, porosity and other lack of filling. Submerged arc welding with stainless steel solid wire, the chemical composition and gas welding stainless steel wire, but should be equipped with no medium in the silicon fluorine or manganese low silicon high fluoride type flux. ER308 stainless steel wire Application: Suitable for welding similar components of the base metal, such as 0Cr19Ni9,00Cr19Ni10yiji AISI 304 steel.
ER308L stainless steel wire used: welding 18Cr-8Ni stainless steel, arc stability, due to increased Si content, welding operation and the fineness of liquid flow better
ER308Lsi stainless steel wire used: welding 18Cr-8Ni stainless steel arc stability, beautiful weld, crack resistance, due to increased Si content, welding operation and melt flow better
ER308H stainless steel wire used: welding 18Cr-8Ni stainless steel, arc stability, beautiful weld, crack resistance
ER307Si stainless steel wire use: high manganese content of the crack sensitivity is low, suitable for non-magnetic steel, high manganese steel, hardened wear-resistant steel and other difficult to weld steel
ER307 stainless steel wire Usage: Suitable for hardened steel, magnetic steel and other difficult to weld steel
ER309 stainless steel wire for 22Cr-12Ni steel welding, dissimilar materials, welding, heat and corrosion resistance, arc stability, beautiful weld.
ER309L stainless steel wire Usage: dissimilar metal welding, good heat corrosion resistance, arc stability, good operating
ER309Lsi stainless steel wire Usage: dissimilar metal welding, good heat and corrosion resistance, arc stability, good workability, due to increased Si content, welding operation and melt flow better
ER309Si stainless steel wire Usage: dissimilar metal welding, good heat and corrosion resistance, arc stability, good operating
ER309Lmo stainless steel wire Application: high temperature heat cracking and corrosion resistance, welding metal for ultra-low carbon austenite, suitable for low carbon steel and stainless steel dissimilar metal welding
ER310 stainless steel wire Usage: Melt with 25Cr-20Ni, used for 310S stainless steel welding than KMS, 309 is more suitable for dissimilar metal welding and self-hardening of high alloy steel and high carbon steel welding
ER312 stainless steel welding purposes: the use of dissimilar steel welding, the crack sensitivity is low, so the welding surface steel and other steel, stainless steel lining, welding difficulties or prone to pores
ER316 stainless steel wire stainless steel wire, in line with GB / T H0Cr19Ni12Mo2. 18Cr-12Ni-2.5Mo (SUS316) steel welding, arc stability, beautiful weld.
ER316L stainless steel wire used: welding 18Cr-12Ni-Mo2 ultra-low carbon stainless steel, welding technology is good, excellent resistance to intergranular corrosion
ER316Lsi stainless steel wire used: welding 18Cr-12Ni-Mo2 ultra-low carbon stainless steel, welding process is good, excellent resistance to intergranular corrosion, due to increased Si content, welding operation and melt flow better
ER317L stainless steel wire Application: ultra-low carbon content and high Mo, anti-intergranular corrosion, high temperature strength
ER318 stainless steel welding purposes: for 18Cr-12Ni-2.5Mo-Ti steel, the working temperature up to 400 ℃ excellent resistance to intergranular corrosion 5
ER318Si stainless steel wire Application: Suitable for 18Cr-12Ni-2.5Mo-Ti steel, excellent resistance to intergranular corrosion, due to increased Si content, welding operation and melt flow better
ER347 stainless steel wire Application: due to the addition of Nb and other alloying elements, so the weld intergranular corrosion resistance enhanced performance, and has excellent high temperature strength, especially for heat-resistant steel welding
ER347Si stainless steel wire used: due to the addition of Nb and other alloying elements, weld intergranular corrosion resistance enhanced performance, and has excellent high temperature strength, especially for heat-resistant steel welding, due to increased Si content, welding operation and Melt liquidity is better
ER2209 stainless steel wire Application: Applicable to 22Cr-9Ni-Mo3 duplex stainless steel, such as UNS31803
ER385 (904L) stainless steel wire Application: Suitable for 20Cr-25Ni-4.5Mo-1.5Cu stainless steel, especially corrosion-resistant
ER409Cb stainless steel wire Usage: Suitable for 409,410 stainless steel welding
ER410 stainless steel welding purposes: for welding 410 or 420 series of stainless steel, hardening, with high temperature oxidation, corrosion resistance, used in oil refining and chemical industry and welding repair
ER410NiMo stainless steel welding purposes: for welding 410 or 420 series of stainless steel, hardening, with high temperature oxidation, corrosion resistance, used in oil refining and chemical industry and welding repair
ER420 stainless steel wire Application: Suitable for 13Cr or 17Cr martensitic stainless steel welding. We have Mig Spool Stainless Steel Welding Wire, size 0.6mm, 0.8mm, 1.0mm, 1.2mm etc. TIG straight stainless steel welding wire, size 1.6mm, 1.8mm, 2.0mm, 2.4mm, 3.2mm etc. Stainless steel Welding Wires can Pack with 0.5kgs, 2kgs, 5kgs, 7kgs, 15kgs etc.

Stainless Steel Welding Wire

Stainless Steel Welding Wire,308 Stainless Steel Welding Wire,Stainless Steel MIG Welding Wire,Stainless Steel Solid Wire

Changzhou Edaweld Trading Company Limited , https://www.edaweld.com