Digital Cumulative counting Electronic Punch Magnetic Induction Proximity Switch   Magnetic Induction Digital Electronic Counter Instruction 1 {C}Five-digit big LCD, super low power consumption, large and clear indication 2 {C}Press Counting/Pause key (Pause) to stop counting, after 0-30 sec, 3 {C}Use magnetic induction, easy to install and precise counting 4 {C}Maximum counting speed: 20 times per second 5 {C}Reset: through pressing the Reset buttons on board or exterior 6 {C}Use the common 5th battery, free from external power supply 7 {C}Anti-vibration, efficiently ensure the stable and reliable system operation 8 {C}Free from mechanical abrasion, safe work, long lifespan  Technical Parameters: Power: 1.5V-AA 5th battery Reset modes: board/exterior Counting range: 0---99999 Available ambient temperature: -5-40°C Minimum counting PW: 10mS Dimension: 64*38*38*mm Distance within the magnetic induction: about 5-10 mm Distance out of the magnetic induction: ≥ 30mm Hole size: 61*36 mm Total weight: about 100g  Configuration List: One digital counter, one magnet, one magnetic induction switch, one pair of supporters  Battery Installation:  Application Method: Start counting: connect the magnetic control induction switch to the counting terminal, During operation:make the magnet follow device with distance from the magnetic switch within 0.5-1cm, Pause counting: Press the Counting/Pause (Pause) key to pause counting. Reset: directly press the Reset button;  Digital Cumulative counting Electronic Punch Magnetic Induction Proximity Switch   Magnetic Induction Digital Electronic Counter Instruction 1 {C}Five-digit big LCD, super low power consumption, large and clear indication 2 {C}Press Counting/Pause key (Pause) to stop counting, after 0-30 sec, 3 {C}Use magnetic induction, easy to install and precise counting 4 {C}Maximum counting speed: 20 times per second 5 {C}Reset: through pressing the Reset buttons on board or exterior 6 {C}Use the common 5th battery, free from external power supply 7 {C}Anti-vibration, efficiently ensure the stable and reliable system operation 8 {C}Free from mechanical abrasion, safe work, long lifespan  Technical Parameters: Power: 1.5V-AA 5th battery Reset modes: board/exterior Counting range: 0---99999 Available ambient temperature: -5-40°C Minimum counting PW: 10mS Dimension: 64*38*38*mm Distance within the magnetic induction: about 5-10 mm Distance out of the magnetic induction: ≥ 30mm Hole size: 61*36 mm Total weight: about 100g  Configuration List: One digital counter, one magnet, one magnetic induction switch, one pair of supporters  Battery Installation:  Application Method: Start counting: connect the magnetic control induction switch to the counting terminal, During operation:make the magnet follow device with distance from the magnetic switch within 0.5-1cm, Pause counting: Press the Counting/Pause (Pause) key to pause counting. Reset: directly press the Reset button;  BEST RECOVERY STRAP WITH 7% MAX STRETCH, NO OTHER STRAP COMPARES - Winnerlifting strap will make your off-road journey a breeze. You can pull out a stuck car with the help of stretch and pull action. The strap has reinforced eye loops for strong Shackle grip, single-ply strap for heavy duty and protective sleeve for injury protection. 3Inch Tow Strap 6M,Emergency Towing Rope,Snowmobile Tow Strap,Wheel Lift Straps,Custom Tow Strap WINNERLIFTING SAFETY EQUIPMENT CO., LTD. , https://www.ratchetstrapfactory.com
       LCD indication will be automatically off and in standby state.
       Press the Counting/Pause key again to turn on the indication and continue to count.
♦First loosen two exterior screws on the external cover, remove the back cover lightly (do not break the signal line),
♦then load one 5th battery (not included in this counter, customer should buy it by themselves,
 the lifespan of common 5th battery is above half year,
♦while the battery with high performance, costing 2 Yuan, is more durable for more than 1 and half years,
 and next restore the back cover and two external screws.
                           according to the requirements of actual operation,
                           flexibly assemble the magnetic induction switch and magnet on the appropriate positions of device,
                           and then do counting once, meanwhile, make the magnet approach,
                           and leave the magnetic control induction switch once.
                              and then move the magnet to lengthen distance to be 3-5cm,
                              and next, start count as 1, repeat the procedures, and accumulate count, like: 0, 1, 2, 3, 4, 5, 6 …
                             (Note: start count when the magnet moves away).
During assembly, please adjust the positions of magnet and induction switch, as well as their distance.
                             According to the running states of counter,
                             the counter LCD indication will be off within 0-30 seconds and into standby state
                             (power consumption nearly closes to 0),
                             Press the Pause key again to turn on the LCD indicator and continue to count.
              or additionally connect one Reset button (need to buy by end user) to the reset terminal,
              and then press it to reset the device
Alan Xue
Yueqing Kampa Electric co,.ltd.
Tel: +0086-577-62729846| Fax: +0086-577-62780320Â | Phone:+0086 15167874317
Web: www.china-kampa.com        Â
       LCD indication will be automatically off and in standby state.
       Press the Counting/Pause key again to turn on the indication and continue to count.
♦First loosen two exterior screws on the external cover, remove the back cover lightly (do not break the signal line),
♦then load one 5th battery (not included in this counter, customer should buy it by themselves,
 the lifespan of common 5th battery is above half year,
♦while the battery with high performance, costing 2 Yuan, is more durable for more than 1 and half years,
 and next restore the back cover and two external screws.
                           according to the requirements of actual operation,
                           flexibly assemble the magnetic induction switch and magnet on the appropriate positions of device,
                           and then do counting once, meanwhile, make the magnet approach,
                           and leave the magnetic control induction switch once.
                              and then move the magnet to lengthen distance to be 3-5cm,
                              and next, start count as 1, repeat the procedures, and accumulate count, like: 0, 1, 2, 3, 4, 5, 6 …
                             (Note: start count when the magnet moves away).
During assembly, please adjust the positions of magnet and induction switch, as well as their distance.
                             According to the running states of counter,
                             the counter LCD indication will be off within 0-30 seconds and into standby state
                             (power consumption nearly closes to 0),
                             Press the Pause key again to turn on the LCD indicator and continue to count.
              or additionally connect one Reset button (need to buy by end user) to the reset terminal,
              and then press it to reset the device
Alan Xue
Yueqing Kampa Electric co,.ltd.
Tel: +0086-577-62729846| Fax: +0086-577-62780320Â | Phone:+0086 15167874317
Web: www.china-kampa.com        Â
Digital Cumulative Counting Electronic Punch Magnetic Induction Proximity Switch
Model NO.: JM72S
Outline Size: 72*72*75mm
Installation Size: 68*68mm
Counter Range: Button Selection 999999 or 0-99999.9
Delay Setting: 0.1-9.9 Seconds
Transport Package: Normal Export Packing
Specification: 72*72*75mm
Origin: China
HS Code: 9032100000
Model NO.: JM72S
Outline Size: 72*72*75mm
Installation Size: 68*68mm
Counter Range: Button Selection 999999 or 0-99999.9
Delay Setting: 0.1-9.9 Seconds
Transport Package: Normal Export Packing
Specification: 72*72*75mm
Origin: China
HS Code: 9032100000