High Speed Injection Molding Machine The high speed Injection Molding Machine adopts the hybrid type of gasoline pump and servo motor. The software of servo hydraulic system has the following advantages: it is not easy to cause damage to the power network by implementing soft starting abrasives, and it can prevent the environmental pollution of working voltage and electric radiation; It can reasonably avoid excessive water temperature and has excellent temperature reduction; Greatly reduce the replacement rate of gear oil.
The servo hydraulic system software can reduce equipment operation and production noise and improve the office environment because it has a good click and power supply system gear oil pump. Compared with the general injection molding machine, the total power consumption of high-speed injection molding machine can be saved by 60~70%, greatly reducing the cost.
Generally speaking, high-speed injection molding machines are all motors. Generally, injection molding machines are all hydraulic injection molding machines, and the relative operation speed of hydraulic injection molding machines is relatively slow. The servo motor of the all-electric high-speed injection molding machine is used to complete mold opening and closing, ejection and demoulding, and raw material injection and storage. The operation speed is fast and high-precision, further improving or improving the working environment and productivity. But now, servo electric injection molding machines only have equipment with clamping force below 850 tons.
High Speed Injection Molding Machine ,High Speed Injection Molding,High Speed Injection Machine,High Speed Plastic Injection Molding Machine Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com
Spiral chute uses gravity to separate particles of different densities. It is used globally in the mineral processing industry, consists of an open trough that twists downward in helix configuration about a central axis.
2. Application of Cost-effective ilmenite ore spiral chute mining gravity separator
It is used to separate the iron, tin, wolfrmite, tantalum, niobium, gold ore of the size between 0.3 and 0.02mm, and the other metals and nonmetal minerals with different gravity property .
 
3. Working principle of Cost-effective ilmenite ore spiral chute mining gravity separator
When working, particles are fed to the top of the spiral chute and are separated radially on the basis of density and size as the slurry gravitates downward. In order to have a good separation, there should be a difference in specific gravity of at least 1.0. Depending upon the material characteristics, a maximum efficiency will usually be reached somewhere in this range. All that is required are some slurry pumps, the slurry to be separated and the banks of spirals with a feed distributor.
4.Technical Parameters of Cost-effective ilmenite ore spiral chute mining gravity separator
Â
Model
LL-1200
LL-900
LL-600
Diameter(mm)
1200
900
600
Pitch(mm)
540/720/900
405/540/675
270/360450
Pitch Ratio
0.45/0.6
/0.750.45/0.6
/0.750.45/0.6
/0.75
Slope(°)
9
9
9
Head
4
4
3
Input Size(mm)
0.03-0.3
0.03-0.3
0.02-0.2
Input Thickness(%)
25-55
25-55
25-55
Capacity(t/h)
4-6
2-3
0.8-12
Dimension
 (mm)1360×1360
×52301100×1100
×4000700×700
×2600
Weight(kg)
600
400
150
6.Our service
1) Installation and guidance
When the machine arrives at your company, we will dispatch our technicians to your company to guide the installation and commissioning at site. User should pay for the following fees air tickets, boarding and lodging and traffic in client's factory.
(2)Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.
(3)Warranty:
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the  life-long follow-up service.
7.our copmany
8.FAQ
Q:Hi, are you mining machinery manufacturer?
A:Yes, we can also provide amples test, mine design, equipment manufacture, after-sale service, etc.Â
Q:which country have your products been exported?
A:Many country, such as India, Ethiopia and so on. And our company has agencies in Zimbabwe, Sudan and Tanzania.
Q:Can you do mineral processing test?
A:Yes, not only can do it in your country, also can back to our company
1. General Introduction of Cost-effective ilmenite ore spiral chute mining gravity separator
Spiral chute uses gravity to separate particles of different densities. It is used globally in the mineral processing industry, consists of an open trough that twists downward in helix configuration about a central axis.
2. Application of Cost-effective ilmenite ore spiral chute mining gravity separator
It is used to separate the iron, tin, wolfrmite, tantalum, niobium, gold ore of the size between 0.3 and 0.02mm, and the other metals and nonmetal minerals with different gravity property .
Â
3. Working principle of Cost-effective ilmenite ore spiral chute mining gravity separator
When working, particles are fed to the top of the spiral chute and are separated radially on the basis of density and size as the slurry gravitates downward. In order to have a good separation, there should be a difference in specific gravity of at least 1.0. Depending upon the material characteristics, a maximum efficiency will usually be reached somewhere in this range. All that is required are some slurry pumps, the slurry to be separated and the banks of spirals with a feed distributor.
4.Technical Parameters of Cost-effective ilmenite ore spiral chute mining gravity separator
Â
Model
LL-1200
LL-900
LL-600
Diameter(mm)
1200
900
600
Pitch(mm)
540/720/900
405/540/675
270/360450
Pitch Ratio
0.45/0.6
/0.750.45/0.6
/0.750.45/0.6
/0.75
Slope(°)
9
9
9
Head
4
4
3
Input Size(mm)
0.03-0.3
0.03-0.3
0.02-0.2
Input Thickness(%)
25-55
25-55
25-55
Capacity(t/h)
4-6
2-3
0.8-12
Dimension
 (mm)1360×1360
×52301100×1100
×4000700×700
×2600
Weight(kg)
600
400
150
6.Our service
1) Installation and guidance
When the machine arrives at your company, we will dispatch our technicians to your company to guide the installation and commissioning at site. User should pay for the following fees air tickets, boarding and lodging and traffic in client's factory.
(2)Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.
(3)Warranty:
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the  life-long follow-up service.
7.our copmany
8.FAQ
Q:Hi, are you mining machinery manufacturer?
A:Yes, we can also provide amples test, mine design, equipment manufacture, after-sale service, etc.Â
Q:which country have your products been exported?
A:Many country, such as India, Ethiopia and so on. And our company has agencies in Zimbabwe, Sudan and Tanzania.
Q:Can you do mineral processing test?
A:Yes, not only can do it in your country, also can back to our company
Cost-Effective Ilmenite Ore Spiral Chute Mining Gravity Separator
Model NO.: LL-1500
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Multi Color
Customized: Non-Customized
Condition: New
Product Name: Mining Machine Gravity Spiral Chute for Mineral Co
Keywords: Gravity Spiral Chute
Installation: Engineer Guide
Diameter: 1500mm
Pitch: 540/720 mm
After Sale Service: Professional Service
Spare Parts Supply: Long Term with Good Price
Delivery Detail: 15 Days
Head: 4
Input Size: 0.04-2 mm
Trademark: Hengchang
Transport Package: Standard Container
Specification: ISO9001: 2008
Origin: Gongyi City, Henan Province, China
HS Code: 8474100000
Model NO.: LL-1500
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Multi Color
Customized: Non-Customized
Condition: New
Product Name: Mining Machine Gravity Spiral Chute for Mineral Co
Keywords: Gravity Spiral Chute
Installation: Engineer Guide
Diameter: 1500mm
Pitch: 540/720 mm
After Sale Service: Professional Service
Spare Parts Supply: Long Term with Good Price
Delivery Detail: 15 Days
Head: 4
Input Size: 0.04-2 mm
Trademark: Hengchang
Transport Package: Standard Container
Specification: ISO9001: 2008
Origin: Gongyi City, Henan Province, China
HS Code: 8474100000
1. General Introduction of Cost-effective ilmenite ore spiral chute mining gravity separator