CEM Hua Shengchang DT-930 small digital multimeter in the following four different quotes, in the Guangdong region quoted at 186-255 yuan, in Shanghai quoted at 205-278 yuan, quoted in Beijing for 188-258 yuan, in Jiangsu offer is 180-210 yuan.

product description

The DT-930 is equipped with a safe housing design and an extra large LCD screen to provide a safer measurement. This watch combines high accuracy, ease of use, safety and reliability, and meets safety standards such as EN61010-1, CATIII 600V, and overload protection.

product features

1.6000-bit large backlit digital display;

2. Data saving, maximum and minimum hold modes make measurements easier;

3. Automatic range

4. Automatic shutdown and low battery indication function can extend battery life and prompt users to replace low-power batteries.

5. AC current adaptation function;

6. Analog bar indication function;

7. Sampling speed: usually twice a second;

DC voltage measurement:

Range: 600.0mV, 6.000V, 60.00V, 600.0V, 1000V

Basic accuracy: ±0.5%

Maximum resolution: 0.1mV, 1mV, 10mV, 100mV, 1V

AC voltage measurement:

Range: 6.000V, 60.00V, 600.0V, 1000V

Basic accuracy: ±0.8%

Maximum resolution: 1mV, 10mV, 100mV, 1V

DC current measurement:

Range: 6A, 10A

Basic accuracy: ±1.2%

Maximum resolution: 1mA, 10mA

AC current measurement:

Range: 6A, 10A

Basic accuracy: ±1.8%

Maximum resolution: 1mA, 10mA

Resistance measurement:

Range: 600.0Ω, 6.000kΩ, 60.00kΩ, 600.0kΩ, 6.000MΩ, 60.00MΩ

Basic accuracy: ±0.8%

Maximum resolution: 0.1Ω, 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ

Capacitance measurement:

Range: 40.00nF, 400.0nF, 4.000uF, 40.00uF, 400.0uF, 4000uF

Basic accuracy: ±3.0%

Resolution: 10pF, 0.1nF, 1nF, 10nF, 0.1uF, 1uF

Frequency measurement:

Range: 9.999Hz, 99.99Hz, 999.9Hz, 9.999kHz, 99.99kHz, 999.9kHz, 10MHz

Basic accuracy: ±1.5%

Resolution: 0.001Hz, 0.01Hz, 0.1Hz, 1Hz, 10Hz, 100Hz, 1kHz

Duty cycle measurement:

Range: 0.1% to 99.9%

Accuracy: ±1.2%

Resolution: 0.1%

Diode and short circuit buzz test:

Diode: 0.3mA typical, open circuit voltage 1.5V DC typical;

Short circuit test: Beep <100W, test current <0.3mA (approx.).