Fittings and Parts of Crushing Machines
There are several fittings and parts
commonly found in crushing machines, including:
1. Jaw Plates: These are the main
wear-resistant parts of the crushing machine. They are fixed on the jaw body
and provide the crushing surface for the material.
2. Toggle Plates: These plates are
connected to the toggle beam and help in adjusting the opening of the crusher.
They also protect the machine from overloading.
3. Eccentric Shaft: This is a critical
component that provides the rotational motion to the jaw crusher. It is usually
made of high-grade forged steel and is responsible for transmitting the
crushing force to the material.
4. Flywheel: The flywheel is a heavy metal
wheel attached to the eccentric shaft. It helps in maintaining the momentum of
the crushing machine and reduces the load fluctuations during the crushing
process.
5. Bearings: Bearings are used to support
the rotating components of the crushing machine, such as the eccentric shaft
and the flywheel. They ensure smooth operation and reduce friction.
6. Crushing Chamber: The crushing chamber
is the space between the fixed jaw plate and the movable jaw plate. It is where
the actual crushing of the material takes place.
7. Wedges: Wedges are used to adjust the
gap between the fixed and movable jaw plates. They help in controlling the size
of the crushed material.
8. Springs: Springs are used to provide the
necessary force for the jaw plates to return to their original position after
crushing the material.
9. Belt and Pulley System: This system is
used to transmit power from the motor to the crushing machine. It consists of a
belt connected to the motor and pulleys attached to the flywheel and eccentric
shaft.
10. Guard Plates: Guard plates are used to
protect the crushing machine from damage caused by foreign objects or excessive
wear.
Jaw Plates, Toggle Plates,Eccentric Shaft,Flywheel,Bearings,Crushing Chamber SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com
OE NO:
Vehicle  type:
detailed features
 1.Chemical  specification
Item
standards
Brake disc
C
3.1--3.4
3.3
Si
1.9--2.3
1.95
Mn
0.6--0.9
0.75
P
0.15 MAX
0.1
S
0.12MAX
0.08
2.Physical propertities
Item
standards
Brake disc
Tensile strength
245 N/mm2 MIN
268
Hardness HB
187--241 HB
230
microstructure
A 85% MIN+B5%MAX
A 92% MIN
+B 4%MAX
Dynamic balance Disc
260 g-cm  MAX
200 g-cm
Dynamic balance Drum
1300 g-cm MAX
500 g-cm
The brake disc (or rotor) is the rotating part of a wheel's disc brake assembly, against which the brake pads are applied. The material is typically gray iron,a form of cast iron.
The design of the discs varies somewhat. Some are simply solid, but others are hollowed out with fins or vanes joining together the disc's two contact surfaces (usually included as part of a casting
process). The weight and power of the vehicle determines
the need for ventilated discs.The "ventilated" disc design helps to dissipate the generated heat and is commonly used on the more-heavily loaded front discs.
Our advantage as below:
3.-Professional Manufacture ,high-volume environmental foundry electric stoves and foundry production line,output reach 5000 tons per month.
Professional Manufacture
4.-Long Service Life and quality warrantee period & Low noise for brake discs.
5.strictly testing and ways for discs and drums dynamic balance.keep the products stable balance during driving.
100% test brake discs'Â crucial dimension inspection and machining surface. 6.Material: casting Iron
7.Standard: HT-250Â Â raw material G3000 standards.
8.Solid or vented for brake discs style: VENTED Â
9.Packing: Neutral or Color carton.poly woodpallet.
10.Short-term Export Credit Insurance, TS16949 and ISO 9002certificate;
11.many years of export experiance.familiar to many kinds of certifications and government CIQ regulation.many kinds of goverments and Customs documents meantime.
12.short lead time :20 days for a 20'Â container.
13. reasonalbe price and small quantity for first orders.. small quantity order acceptalbe ;Â MOQ at least 10--30pcs;
14.we especially can develop and produce difficult and complex crafts works for brake disc parts,such as especial change some sizes,adjust chemical raw material formulas,brake discs'surface especial treatments(DACROMET,ZINC PLATED,BLACK COLOR) ,Also.Surface drilled holes or scottled lines etc.works..
15. quality warrante period: 1 year or 100000 kliometers.
16.can accept drawing or sample supplying to design or explore new items brake discs or rotors.
Also brake drums too.
welcome enquiry and visit us.Baiwang series Car or truck brake discs and brake drums with more modes and more tems as our best advantage;
Â
We are a global trading company. Our products sell well in Czech, Lithuania, Georgia, Australia, the Middle East, Africa and other regions, countries, and customers in many countries and regions
have formed a trade partnership. The customers who have worked with us agree with our products very much, and agree with our service very much. We also have a professional R & D team.
Â
Car Brake disc /rotor Â
OE NO:
Vehicle  type:
detailed features
 1.Chemical  specification
Item
standards
Brake disc
C
3.1--3.4
3.3
Si
1.9--2.3
1.95
Mn
0.6--0.9
0.75
P
0.15 MAX
0.1
S
0.12MAX
0.08
2.Physical propertities
Item
standards
Brake disc
Tensile strength
245 N/mm2 MIN
268
Hardness HB
187--241 HB
230
microstructure
A 85% MIN+B5%MAX
A 92% MIN
+B 4%MAX
Dynamic balance Disc
260 g-cm  MAX
200 g-cm
Dynamic balance Drum
1300 g-cm MAX
500 g-cm
The brake disc (or rotor) is the rotating part of a wheel's disc brake assembly, against which the brake pads are applied. The material is typically gray iron,a form of cast iron.
The design of the discs varies somewhat. Some are simply solid, but others are hollowed out with fins or vanes joining together the disc's two contact surfaces (usually included as part of a casting
process). The weight and power of the vehicle determines
the need for ventilated discs.The "ventilated" disc design helps to dissipate the generated heat and is commonly used on the more-heavily loaded front discs.
Our advantage as below:
3.-Professional Manufacture ,high-volume environmental foundry electric stoves and foundry production line,output reach 5000 tons per month.
Professional Manufacture
4.-Long Service Life and quality warrantee period & Low noise for brake discs.
5.strictly testing and ways for discs and drums dynamic balance.keep the products stable balance during driving.
100% test brake discs'Â crucial dimension inspection and machining surface. 6.Material: casting Iron
7.Standard: HT-250Â Â raw material G3000 standards.
8.Solid or vented for brake discs style: VENTED Â
9.Packing: Neutral or Color carton.poly woodpallet.
10.Short-term Export Credit Insurance, TS16949 and ISO 9002certificate;
11.many years of export experiance.familiar to many kinds of certifications and government CIQ regulation.many kinds of goverments and Customs documents meantime.
12.short lead time :20 days for a 20'Â container.
13. reasonalbe price and small quantity for first orders.. small quantity order acceptalbe ;Â MOQ at least 10--30pcs;
14.we especially can develop and produce difficult and complex crafts works for brake disc parts,such as especial change some sizes,adjust chemical raw material formulas,brake discs'surface especial treatments(DACROMET,ZINC PLATED,BLACK COLOR) ,Also.Surface drilled holes or scottled lines etc.works..
15. quality warrante period: 1 year or 100000 kliometers.
16.can accept drawing or sample supplying to design or explore new items brake discs or rotors.
Also brake drums too.
welcome enquiry and visit us.Baiwang series Car or truck brake discs and brake drums with more modes and more tems as our best advantage;
Â
We are a global trading company. Our products sell well in Czech, Lithuania, Georgia, Australia, the Middle East, Africa and other regions, countries, and customers in many countries and regions
have formed a trade partnership. The customers who have worked with us agree with our products very much, and agree with our service very much. We also have a professional R & D team.
Â
Brake Part Brake Disc for Brake Parts
Tensile Strength: 268 N/M Min
Trademark: BAIWANG
Transport Package: Plastic Bag with Pallet
Specification: G3000
Origin: Zichuan, Zibo, Shandong, China
HS Code: 8708309990
Tensile Strength: 268 N/M Min
Trademark: BAIWANG
Transport Package: Plastic Bag with Pallet
Specification: G3000
Origin: Zichuan, Zibo, Shandong, China
HS Code: 8708309990
Car Brake disc /rotor Â