60HP Screw Type Industrial Air Cooled Screw Chiller

<

Model NO.: DNC-255WSH
Application Fields: Chemical
Application Machine: Precision Machine Tool
Certification: CE, CCC
Condition: New
Refrigerant: R22/R407c/R134A
Trademark: DANNICE
Transport Package: Standard E&sime; Port Wooden Case
Specification: 2600*680*1650mm
Origin: China
HS Code: 8418692090

1.DANNICE Brand water cooled water chiller general introduction
a)Low Noise
b)High Efficient and Energy Saving
c)Easy Operation and Installation
d)Compact Exterior
e)High quality
f)Competitive price
g)CE certificated
 
2.DANNICE Water Chiller Features
1).The Chiller cooling capacity ranged from 90Kw to 7400 Kw.
2). Adopt good quality famous brand HANBELL compressor,high efficiency, low noise, less 
  wearing and long life
3).Both Evaporator and Condenser are made of grooved copper tubes.
4). World famous brand parts: such Danfoss/ ALCO expansion valve, FUJI contactor other brand like PUNP,
5). Water chillers have high COP,average COP keep 4.1-5.6, and highest can reach 8.0
6). Stable quality, long using life. 
7).Heat recovery(optional)can help user produce free hot water, which can be 55C
8). Can be widely used in different area,such as in commercial AC, Massage center, Hospital, Hotel, School, etc 
9). Strong unit base frame ensured the equipment stable operation 
10). Adopt leading brand PLC or SCM controller
11). Multi-capacity regulation, energy saving, cost cut down greatly for operation and maintenance.

60HP Screw Type Industrial Air Cooled Screw Chiller

60HP Screw Type Industrial Air Cooled Screw Chiller
60HP Screw Type Industrial Air Cooled Screw Chiller
60HP Screw Type Industrial Air Cooled Screw Chiller
60HP Screw Type Industrial Air Cooled Screw Chiller
60HP Screw Type Industrial Air Cooled Screw Chiller








 

Fittings and Parts of Crushing Machines

There are several fittings and parts commonly found in crushing machines, including:

1. Jaw Plates: These are the main wear-resistant parts of the crushing machine. They are fixed on the jaw body and provide the crushing surface for the material.

2. Toggle Plates: These plates are connected to the toggle beam and help in adjusting the opening of the crusher. They also protect the machine from overloading.

3. Eccentric Shaft: This is a critical component that provides the rotational motion to the jaw crusher. It is usually made of high-grade forged steel and is responsible for transmitting the crushing force to the material.

4. Flywheel: The flywheel is a heavy metal wheel attached to the eccentric shaft. It helps in maintaining the momentum of the crushing machine and reduces the load fluctuations during the crushing process.

5. Bearings: Bearings are used to support the rotating components of the crushing machine, such as the eccentric shaft and the flywheel. They ensure smooth operation and reduce friction.

6. Crushing Chamber: The crushing chamber is the space between the fixed jaw plate and the movable jaw plate. It is where the actual crushing of the material takes place.

7. Wedges: Wedges are used to adjust the gap between the fixed and movable jaw plates. They help in controlling the size of the crushed material.

8. Springs: Springs are used to provide the necessary force for the jaw plates to return to their original position after crushing the material.

9. Belt and Pulley System: This system is used to transmit power from the motor to the crushing machine. It consists of a belt connected to the motor and pulleys attached to the flywheel and eccentric shaft.

10. Guard Plates: Guard plates are used to protect the crushing machine from damage caused by foreign objects or excessive wear.

electrical crusher fittings, crushing fittings, crusher fittings

SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com