What should I do if the refuse sweeper gearbox speed sensor is broken? Reader's question: Recently I discovered that the speed sensor of the transmission of my garbage sweeper is broken. What should I do with this? Reply: There are many ways to damage the components. According to the reason of its fault diagnosis, the road sweeper transmission speed sensor is frequently faulty. If the quality of the component itself is eliminated, it is recommended to check the signal generator that works with the road sweeper sensor. To completely solve the problem. How to do when the sweeper starts to turn off? The reader asked: Recently, when we use a sweeping vehicle to catch fire in the morning, we will always turn off with a step. How is this going to happen? Re: If the road sweeper fails to supply fuel to the oil, then this fault should not have much to do with the gearbox. In this case, the failure of the garbage sweeper is in the engine cold state in the morning, or should it be checked For the carbon deposition problem of the throttle valve and the intake port of the road car, it is recommended that you go to the sweeper service station for detailed inspection. What is the cause of the steering wheel shake while sweeping the vehicle? Reader's question: The steering wheel has been shaken recently when the garbage sweeper is driving. What is the reason? Re: The steering wheel of the road sweeper is mainly concerned with the dynamic balance of the wheel. When the balance of the wheel is inaccurate, it will cause the jitter at a certain speed point. This failure phenomenon is mainly related to your previous tyre repair. After repairing the tyre, you need to Rebalancing, otherwise it will cause the steering wheel to shake. It is recommended to rebalance the wheels and solve the problem after balancing. Second, the repaired tires are best placed on the rear wheels, and the two front wheels try not to use the repaired tires. What is the problem with shifting to frequent failures? Reader's question: In the near future, there will always be a phenomenon that the garbage sweeper turns to failure. What is the problem? Re: The failure of the steering mechanism is often caused by poor quality or damage to parts of the mechanism, such as mechanical damage, loosening, hairpinning, and failure of the power assist device. The occurrence of such situations generally has no prior signs and processing is difficult. Once this happens, road sweepers often do not go the right way and should brake quickly. For a steering mechanism that uses a steering booster, if the assistance fails, apply force to the direction and do not blindly brake to avoid serious consequences. An effective approach to prevention is to constantly inspect and maintain the road sweeper steering system so that it is always in good condition. The welding neck flange refers to a kind of flange with cone neck and butt welding with cylinder or pipe. It is an integral flange, suitable for high pressure, high temperature or high sealing requirements. Carbon Steel Welding Neck Flange,Carbon Wn Flange,Raised Face Weld Neck Flange,Long Weld Neck Flange Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com