Water Flow Control Valve

<

  • Model NO.: Runxin Valves
  • Water Inlet/Outlet: 2"M(Outer Tooth)
  • Transport Package: Carton
  • Origin: China
  • Water Capacity: 10t/H
  • Trademark: Runxin
  • Specification: 53502
  • HS Code: 84819090

Water Flow Control Valve
Water Flow Control Valve
Products Name:water flow control valve

Residential Softener and Filter
 
Manual Filter Valves
1. Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect, sealing 
2. No water flows out in the drain line when in washing position with signal tank valve
3. Side control available.
 
Automatic Filter Valves
1. Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect, sealing 
2. No water flows out in the drain line when in washing position with signal tank valve
3. It adopts LED dynamic colorful screen: The colorful screen move to flicker during running, otherwise it is in the state of washing 
4. Keyboard locked function: The key set will lock automatically if no operate more than one minute
5. Indication and parameter saved after power off
6. Repeating-washing can be set
 
Manual Softener Valves
1. Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect, sealing 
2. No water flows out in the drain line when in washing position with signal tank valve
3. Side control available.
 
Automatic Softener Valves
1. Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect, sealing 
2. No water flows out in the drain line when in washing position with signal tank valve
3. It adopts LED dynamic colorful screen: The colorful screen move to flicker during running, otherwise it is in the state of washing 
4. Keyboard locked function: The key set will lock automatically if no operate more than one minute
5. Indication and parameter saved after power off
6. The interval back-wash time can be set (suitable for F68,69),multiple operating in service with one time backwash. Saving salt and water.
7. Bypass available for valves
 
Automatic Softener Valves F79 F82 Series
1. It adopts LED dynamic colorful screen with language selecting interface including English, Chinese, Russian, Spanish, French, Italian, Deutsch
2. The down-flow and up-flow regeneration can be chosen.
3. Unit of measurement can be choose L, gal or M3.
4. With the connector of salt shortage alarm and with disinfect connector
5. No hard water by pass when regeneration for type A, and with hard water bypass when regeneration for type B 
 
 
Automatic Valves D (LCD Display) Series ( filter and Softener)
1. It adopts LED dynamic colorful screen with language selecting interface with English and Chinese.
2. The Softener is featured with the connector of salt shortage alarm and disinfect connector
3. For filter valves, the inlet and outlet are behind the display screen, convenient to connect.
4. Foreground mode and background mode available
 
Industrial and Commercial Control Valves
 
Manual Filter Valves
1. Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect, sealing 
2. No water flows out in the drain line when in washing position with signal tank valve
3. Side control available
 
 
Automatic Filter Valves
1. Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect, sealing 
2. No water flows out in the drain line when in washing position with signal tank valve
3. It adopts LED dynamic colorful screen: The colorful screen move to flicker during running, otherwise it is in the state of washing 
4. Keyboard locked function: The key set will lock automatically if no operate more than one minute
5. Indication and parameter saved after power off
6. Repeating-washing can be set. Choose by day or by hour in service
7. Single port control output: control inlet booster pump or outlet solenoid valve
8. Remote handle input signal: it can accept pulse signal then start to regeneration

Water Flow Control Valve
 
Series MT-F11, MT-E, MT-C, MT-R Series MT-H Series MT-G, MT-GM, MT-D Series
Flow Rate(50PSI/3.5bar) Valve Alone
Continuous (15PSI/1bar drop) 20GPM/76LPM 14GPM/53LPM 20GPM/76LPM
Peak (25PSI/1.7bar drop) 26GPM/98LPM 18GPM/68LPM 26GPM/98LPM
Max. Backwash    (25PSI/1.7bar drop) 7GPM/26LPM 7GPM/29LPM 17GPM/64LPM
CV(1PSI/0.07bar drop) 5.0  3.6  5.0 
Flow Rate(50PSI/3.5bar) Softener(15PSI/1bar Drop)
8×44 0.75CF/21L resin 9.6GPM/36.5LPM 9.2GPM/35LPM 9.6GPM/36.5LPM
9×48 1.0CF/29L resin 11.5GPM/43.5LPM 10GPM/38LPM 11.5GPM/43.5LPM
10×54 1.5CF/43L resin 11.8GPM/44.5LPM 10.2GPM/38.6LPM 11.8GPM/44.5LPM
12×48 2.0CF/57L resin 12.8GPM/48.5LPM N/A 12.8GPM/48.5LPM
14×65 3.0CF/85L resin N/A N/A 14.5GPM/55LPM
16×65 4.0CF/113L resin N/A N/A 15GPM/57LPM
Regeneration
Downflow/Upflow Downflow Downflow Both
Cycles 7 5 5
Adjustable cycles Brine Brine All
Time available 180Minutes 180Minutes Up to 999 Minutes per cycle
Flow Meter
Accuracy 0.25-15GPM/0.95-57LPM±5% N/A 0.25-15GPM/0.95-57LPM±5%
Capacity Range Standard 125-2100Gallon/0.5-8m3 N/A 1-99,999
Extended 625-10800Gallon/2.4-40m3
Mounting& Shipping
Inlet/Outlet 1" or 3/4", NPTor BSP 3/4" BSP 1" or 3/4", NPTor BSP
Base 2-1/2"-8 UN 2-1/2"-8 NPSM 2-1/2"-8 NPSM
Distributor pilot 1.05" OD 1.05" OD 1.05" OD
Drain Line 1/2" ID 1/2" ID 1/2" ID
Braine Line 3/8" OD 3/8" OD 3/8" OD or 3/4" OD
Height from top of tank 7"/178mm 7.9"/200mm 7.9"/200mm
Weight(single valve gross) Timer 2.3KG/Meter 2.5KG Timer 5.2KG 2.3KG
Working
Electrical rating 220V,110V,24V-50Hz,60Hz 220V,110V,24V-50Hz,60Hz 220V,110V,24V-50Hz,60Hz
Max. VA 3VA 3VA 3VA
Pressure Hydrostatic: 300PSI/20bar
Working: 20-120PSI/1.4-8bar		 Hydrostatic: 300PSI/20bar
Working: 20-120PSI/1.4-8bar		 Hydrostatic: 300PSI/20bar
Working: 20-120PSI/1.4-8bar
Temperature 1-43 C/34-110F 1-80C/34-175F 1-43C/34-110F

Saddle Fusion

What is saddle fusion? Saddle fusion (sidewall fuson) is, like butt fusion and socket fusion, another process based on hot plate welding. Saddle heat fusion differs from either socket, or butt fusion methods by performing fusion into the side of the pipe wall in a transverse orientation to the main pipe, rather than in line with the pipe. Hdpe saddle welding required workshop saddle fusion machines. This hdpe fusing process can be conducted while pressurized creating a [hot tap" when allowed by regulations and the pipeline owner. The pipe and saddle fitting surfaces are heated/fusing until they reach a proper temperature, the heating tool is removed and then the weld is formed. The process is complete following a cooling process. Always have a trained joining operator perform this procedure using properly maintained Pipe Fabrication Workshop Machines. For polyethylene reducing tee fabrication, you can view Wuxi Yuda MRH series HDPE/Poly/Polyethylene plastic pipe saddle welding machines on "www(dot)cnbuttfusion(dot)com"

Saddle Fusion,Electrofusion Saddle,Saddle Welding Machine,Saddle Fusion Machines

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com