Toko E71t-1c Filled Metal Welding Wire in Spools

<

Model NO.: E71T-1C
Trademark: TOKO
Transport Package: 15kg/Roll, 1000kg/Pallet
Specification: Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm
Origin: China
HS Code: 83111300
Model NO.: E71T-1C
Trademark: TOKO
Transport Package: 15kg/Roll, 1000kg/Pallet
Specification: Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm
Origin: China
HS Code: 83111300

TOKO E71T-1C Filled Metal Flux Cored Welding Wire in Spools

1. Excellent welding performance, soft and stable arc.

2. Low spatter loss, easy slag removal, Beatiful appearance of weld and high X-ray safty

3. Rutile type flux cored wire of 490Mpa high tensile steel

Instruction

1. Gas- Shielded:100% CO2 OR 75% Ar 25% CO2

2. When welding, the gas flow rate shoule keep between 15L/min and 25L/min

3.The oil stains and rust on the welding should be cleared away.

Chemical Composition of Deposited Metal

Item C Mn Si P S Cr Ni Mo V Cu
Standard ≤0.18 ≤1.75 ≤0.90 ≤0.03 ≤0.03 ≤0.20 ≤0.50 ≤0.03 ≤0.08 ≤0.35
( AWS E71T-1)

Machanical Properties of Deposited Metal

Item YP Rel/ Mpa Tensile Strength/ Mpa Elongation % Impact Value Impact Energy Average (J)
Standard ≥400 ≥480 >20 -20 >27  
( AWS E71T-1C)

Reference Welding Parameter (DC+) & Voltage Range

  1.2MM 1.6MM
 
Volt 16-34V 22-42V
Amp 120-320A 180-400A
CO2 Flow 15-25L/Min 15-25L/Min

Application

Shipbuilding, Offshore, bridge, pressure vessal and general fabrications etc.


Toko E71t-1c Filled Metal Welding Wire in Spools


Toko E71t-1c Filled Metal Welding Wire in Spools
Toko E71t-1c Filled Metal Welding Wire in Spools
Toko E71t-1c Filled Metal Welding Wire in Spools

Toko E71t-1c Filled Metal Welding Wire in Spools

 

TOKO E71T-1C Filled Metal Flux Cored Welding Wire in Spools

1. Excellent welding performance, soft and stable arc.

2. Low spatter loss, easy slag removal, Beatiful appearance of weld and high X-ray safty

3. Rutile type flux cored wire of 490Mpa high tensile steel

Instruction

1. Gas- Shielded:100% CO2 OR 75% Ar 25% CO2

2. When welding, the gas flow rate shoule keep between 15L/min and 25L/min

3.The oil stains and rust on the welding should be cleared away.

Chemical Composition of Deposited Metal

Item C Mn Si P S Cr Ni Mo V Cu
Standard ≤0.18 ≤1.75 ≤0.90 ≤0.03 ≤0.03 ≤0.20 ≤0.50 ≤0.03 ≤0.08 ≤0.35
( AWS E71T-1)

Machanical Properties of Deposited Metal

Item YP Rel/ Mpa Tensile Strength/ Mpa Elongation % Impact Value Impact Energy Average (J)
Standard ≥400 ≥480 >20 -20 >27  
( AWS E71T-1C)

Reference Welding Parameter (DC+) & Voltage Range

  1.2MM 1.6MM
 
Volt 16-34V 22-42V
Amp 120-320A 180-400A
CO2 Flow 15-25L/Min 15-25L/Min

Application

Shipbuilding, Offshore, bridge, pressure vessal and general fabrications etc.


Toko E71t-1c Filled Metal Welding Wire in Spools


Toko E71t-1c Filled Metal Welding Wire in Spools
Toko E71t-1c Filled Metal Welding Wire in Spools
Toko E71t-1c Filled Metal Welding Wire in Spools

Toko E71t-1c Filled Metal Welding Wire in Spools

 

Stainless Wire Mesh

Stainless Wire Mesh,Sus304 Stainless Steel Wire Mesh,Stainless Steel Woven Mesh,Stainless Steel Filter Wire Mesh

HEBEI CONQUER HARDWARE WIRE MESH CO.,LTD , https://www.conquerwiremesh.com