Tianjin long-distance passenger vehicle equipped with passenger temporary safety staff to eliminate potential safety hazards

<

The “8·26” particularly serious road traffic accident in Bao'an Expressway in Yan'an, Shaanxi Province, sounded the alarm for the national long-distance passenger transport system. Recently, the Tianjin long-distance passenger transport department has launched a new measure of “temporary safety personnel” for each long-distance vehicle on the basis of a comprehensive inspection of the safety of passenger cars, eliminating the potential safety problems of long-distance passenger vehicles in all directions.

After the occurrence of a particularly serious traffic accident in Yanan, Shaanxi, August 26th, the long-distance passenger transport department of Tianjin immediately carried out a large-scale vehicle safety inspection. According to the current regulations, all 400 km or more lines are equipped with two drivers, more than one thousand kilometers. The driver of the line is to be equipped with three drivers, and the driver of the rotation rests on a responsibility called a safety supervisor who is responsible for supervising the other driver not to experience fatigue.

However, we have seen that in actual operation, the driver’s fatigued driving situation still occurs from time to time. Therefore, in order to more directly supervise the operation of the driver, the Tianjin Long-distance Passenger Transport Department has recently issued a provisional security officer’s provision in conjunction with the public security and fire departments. In other words, each long-distance bus must designate a certain number of passengers to volunteer as temporary security officers in accordance with the time of travel. The security officer must ensure that the two-hour shift is performed once. The duty of the temporary safety officer during driving is to maintain a sober state. The driver is always reminded to prohibit driving fatigue. When something happens, such as a fire, he must first wake up the passengers and organize the passengers to evacuate.

In addition to the interim safety measures, the Tianjin Passenger Transport Department also stipulated that in the event of high accidents between 3:00 and 4:00 a.m., it also stipulates that long-distance running buses should be temporarily parked between 2:00 and 5:00 a.m. and all long-distance passenger cars in Tianjin are now available. GPS satellite positioning systems have been installed, and 3G video systems have been used to perform real-time monitoring of vehicles operating outside. According to Tianjin Transportation Group, they have decided not to introduce new sleeper buses in the future, at the latest four years later. The sleeper bus will exit Tianjin's passenger transport market and will be replaced by a large-angle semi-lying aviation seat luxury bus. This vehicle will sit for two purposes and the distance between seats will reach one meter, and the safety will also be greatly improved.

Warp Knitting Machine Accessories

Warp Knitting Machine accessories are parts that are used to enhance the functionality of warp knitting machine. These accessories are designed to enhance the performance of the machine and improve the quality of the knitted fabric.


1. Camera Detection: This accessory is used to detect any defects in the knitted fabric. It is a high-tech system that uses cameras to scan the fabric and identify any flaws or defects. The system can detect holes, dropped stitches, and other defects, which helps the operator to take corrective action immediately.

Qq 20221110161231


2. Laser Stop: This accessory is used to stop the machine automatically when a defect is detected. The laser stop system is linked to the camera detection system, and it can stop the machine at the exact point where the defect occurred. This helps to minimize waste and reduce downtime.

laser stop


3. Knotting Machine: This accessory is used to tie the yarn ends together when changing colors or when a yarn break occurs. The knotting machine is an automated system that ties the yarn ends together quickly and efficiently, without interrupting the knitting process.

Knotting Machine 1


4. Conversion: This accessory is used to convert the warp knitting machine from one gauge to another. The conversion system includes different types of needles, sinkers, and guide bars, which can be easily changed to adjust the gauge of the machine.

5. Waste Yarn Spooler: This accessory is used to collect the waste yarn that is generated during the knitting process. The waste yarn spooler collects the yarn and winds it onto a spool, which can be easily removed and disposed of.


Overall, these accessories are essential components of a warp knitting machine, and they help to improve the efficiency and productivity of the machine. They also help to ensure that the quality of the knitted fabric is consistent and of high quality. We are the professional warp knitting machine manufacturer located in China, welcome to consult us.

Warp Knitting Machine Accessories

suzhou cotex international Co.,Ltd , https://www.macanol.com