Stainless Steel Wire Mesh,Stainless Steel Wire Mesh Screen,Stainless Steel Wire Mesh Sheets,Black Stainless Steel Wire Mesh glorybest industry co.,ltd , https://www.hbglorybest.com
The release of two national standards for lighting equipment is good for the LED lighting industry
According to reports, yesterday was the World Standards Day. The National Standards Committee, the Ministry of Industry and Information Technology and other departments jointly issued 33 national standards. Among them, the energy efficiency limit value and energy conservation evaluation of halogen lamps for general lighting are closely related to people's health and safety and environmental protection. "Value" and "Evaluation of Electromagnetic Radiation of Human Body by Lighting Equipment" have attracted much attention. The chief engineer of the National Lighting Appliance Standardization Technical Committee, Cha Yuedan, told reporters that the “Energy Efficiency Limit Value and Energy Conservation Evaluation Value for Tungsten Lamps for General Lighting†released this time is one of the important achievements of the 100 energy efficiency standard promotion projects. In order to save electricity for lighting, China began to implement the roadmap for eliminating incandescent lamps on October 1, 2012. Through the implementation of the five-year roadmap, incandescent lamps above 15W were gradually phased out of the Chinese market. If the 50 incandescent lamp is replaced by an energy-saving tungsten halogen lamp, the country can save 400 million kWh, and the energy saving effect is obvious. The introduction of the national standard "Evaluation of electromagnetic radiation of human body by lighting equipment" not only provides reference for enterprises to judge whether products meet safety requirements, but also provides a reference for the public to correctly understand lighting equipment. Cha Yuedan told reporters that the State Council's action plan for energy conservation and emission reduction and low carbon development from 2014 to 2015 clearly required the implementation of 100 bright standard promotion projects, and formulated a series of important standards, general illumination, tungsten halogen lamps and bright effects. The fixed value and the energy saving evaluation value are proposed in this context. If the standard is implemented, it will significantly increase the energy-saving effect of the products produced by the company. However, in the process of implementing standards, incandescent lamp manufacturers will encounter great challenges. Process modifications must be carried out. Lighting equipment can be seen everywhere in people's lives. How to evaluate the impact of electromagnetic radiation generated by such equipment on the human body is public. Issues of common concern with companies. He said that in 2012, it was reported in the media that the energy consumption of energy-saving lamps caused a large amount of reversal, which also led to the research and discussion of the issue of lighting products in the industry. It is in this context that the standard. The significance of the implementation of this standard is to help the public to understand and correctly judge the electromagnetic radiation generated by the lighting equipment in order to facilitate the enterprise to evaluate and judge whether the product meets the requirements of electromagnetic radiation. The standard provides a clear analysis of the measurement method and the compatible values ​​of the measurements. The implementation of this standard not only provides enterprises with a safe quality tool for evaluating lighting appliances and electromagnetic radiation, but also provides a reference for lighting equipment that the public correctly understands. What impact will the enactment of these two standards have on the capital market? Shenyang Securities Investment Consultant Shenyang believes that this shows that the pace of eliminating incandescent lamps in China is increasing, which will benefit the LED lighting industry. Compared with energy-saving lamps, LED lamps have no radiation. Compared with tungsten halogen lamps, LED lamps have a wider application environment because of tungsten halogen. The lamp cannot be used in some dusty, flammable, explosive, corrosive environments. Shenyang said that the evaluation of the electromagnetic radiation of the human body by the lighting equipment and the formulation of the tungsten halogen lamp standard have great significance for the entire capital market. Nowadays, the world is setting off a wave of incandescent lamps, and incandescent lamps, as the first generation of light sources, can replace many varieties, and energy-saving lamps are one. The energy-saving lamp market is already a mess, because in the production of energy-saving lamps, the country's mandatory standards only have one requirement for electromagnetic compatibility. For the energy-saving lamps, the secondary energy radiation problem has been a blind spot. After the standard is determined, the detection mechanism can limit the amount of energy saved by the energy-saving lamp. However, no matter how the energy-saving lamps still have a slight amount of radiation, this is more obvious than the LED lights. The LED lights are better in quality and basically have no radiation. According to the survey conducted by the China Lighting Association, there are 100 million households of energy-saving lamps currently in use in China, and the total market for individual energy-saving lamps is more than 12 billion. Therefore, this standard will usher in a more obvious boost for the entire LED industry. In addition, tungsten halogen lamps do have many advantages, including high luminous efficiency, small aperture and long life, but these characteristics show that it has a tendency to replace incandescent lamps. The biggest disadvantage of the tungsten halogen lamp is that it has a limitation on the use area because it has a relatively high operating temperature and is not suitable for use in dangerous places such as explosion, danger and corrosion. In this case, the tungsten halogen lamp and the LED lamp are compared. The 1W LED is equivalent to the 8W tungsten halogen lamp, and the life of the LED lamp is generally 30,000 hours, while the tungsten halogen lamp is only a few thousand hours, so all aspects are The advantages of comparing LED lights are obvious. Therefore, the implementation of the corresponding standards now shows that the pace of eliminating incandescent lamps is gradually accelerating, and the tungsten halogen lamps and LED lamps can complement each other in terms of price and scope of use, and there is no contradiction. Considering that the current ratio of LEDs to the number of global luminaires is only 1, the space that can be increased is relatively large.