Recently, French SMP company has grandly displayed its flagship product CA6 CNC tool grinder. It is reported that the grinding machine is a universal five-axis grinding center with a long longitudinal stroke and a large-area work table, suitable for grinding large and medium-sized tools with the aid of a tailstock, a motorized bracket and a tilting knife device. As long as a machine tool is used, the following tools can be reground or manufactured: drills, reamers, end mills, broaches, hobbing tools, indexing inserts, and other complex parts.
Related personnel introduced, five-axis five linkage numerical control system, the machine can grinding high speed steel (HSS), carbide and other materials; the grinding wheel with the right position, angle and trajectory for grinding; for both manufacturing and re-grinding Realize rapid switching between tools of different specifications and save time; the distance between the grinding wheel position and the grinding wheel axis is short and the rigidity is strong; all the guide rails and other moving parts adopt the central lubrication system; the spindle cooling system and the grinding wheel flange Integrated with high-frequency grinding head with built-in motor; grinding fluid injection system with filtering device; air conditioning system in the electrical cabinet. SOFTWARE- The software provided with the machine is directly connected to the CNC. It is the intelligent core of the machine and can also be connected to measuring probes.

It is understood that NUMAFFUT software can describe the description of the tool to be ground, the parameters obtained by measuring the probe, the description of the tool grinding process steps, the selection of the grinding wheel to be used and other parameter options (stored in advance on the hard disk), and the process parameters. Selection, such as spindle speed, feed rate, number of feeds, etc. Any data has a default value, but it can also be modified or optimized by NUMAFFUT software to calculate the trajectory and turn it into an NC program. The NC program drives five CNC axes to complete the required grinding work. When the machine tool is being processed, the next program can be prepared. The new grinding program can be started again without remeasuring or returning to the origin. All NC programs of the grinding machine are written with SMPNumaffut software. NCSIMUL is usually installed in the machine tool to check the NC program written by the programmer. Check and prevent all accidents encountered during processing.