Company information

The MEDAS Group is a developing leading industrial in China in the two business
areas of pump and garden care and consumer goods. The MEDAS Group's products
and services are designed to improve the quality of life by providing solutions that
are both innovative and beneficial.

Since being founded in 1997, MEDAS has rapidly emerged as a company spanning
the entire domestic market. MEDAS has always oriented itself towards fostering
talent and technology-based production, guiding our success with customer support
and trust. Almost all our office staff have a bachelor degree or above and vast operational experience, helping to efficiently provide design and experimental operation as well.
The principle of "Quality comes first" is deeply embedded in the heart of every Medaser,
a principle which MEDAS also reflects on the large scale.




Our service

We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and  logistics. Our professionalism guides us through the development
and production process.

Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.



Company information

The MEDAS Group is a developing leading industrial in China in the two business
areas of pump and garden care and consumer goods. The MEDAS Group's products
and services are designed to improve the quality of life by providing solutions that
are both innovative and beneficial.

Since being founded in 1997, MEDAS has rapidly emerged as a company spanning
the entire domestic market. MEDAS has always oriented itself towards fostering
talent and technology-based production, guiding our success with customer support
and trust. Almost all our office staff have a bachelor degree or above and vast operational experience, helping to efficiently provide design and experimental operation as well.
The principle of "Quality comes first" is deeply embedded in the heart of every Medaser,
a principle which MEDAS also reflects on the large scale.



FAQ

Q: What is our policy of the payment term?
A: -100% advanced payment is the first option we prefer to taking.

-Any order valued less than USD10,000 has to be 100% prepaid.

-Irrevocable L/C at sight is acceptable for most of business.

-Irrevocable L/C with less than 60-day term will be only acceptable for some
business after negotiation.

-Any L/C with more than 60-day term will not be acceptable.

-D/P at sight will be acceptable for some business after negotiation, while other
terms will not be acceptable.

-D/A and O/A will not be acceptable basically.

-Partial payment is negotiable, but normally we require the advanced payment
no less than 30%, and the balance to be paid before shipment

Q: How long will be the lead time for the orders to us?
A: -Normally the lead time for our orders is 45-60 days, depending on the order
quantity and our production schedule.

-Normally the lead time is calculated from the date of receiving the L/C or advanced
payment as agreed in contract.

-Some rush orders might be fulfilled within 30 days or even shorter time, until we
finally approve.

Q: Do we have minimum order requirement?
A: -Yes, the minimum order value has to be USD2,000.

-Any order with less than USD2,000 will be only acceptable after negotiation.

-Sample order is exception.

-As for the minimum quantity for each product, please contact with us for further information.

Their rollers and the outer wheels are arranged in a right angle intersecting intersecting. They can bear the load from all directions at the same time (such as axial, thrust or momentum hormones, etc.). Because of the linear contact between the roller and the track surface, the possibility of the axis to bear the load and the elastic deformation is very small. This type of bearing is widely used in industrial robots, working machines and medical facilities. It needs high rigidity, high speed and high speed to ensure precise occasions.

In cross roller bearings, cylindrical rollers are perpendicular to each other through spacer retainers on the top, so 1 cross roller bearings can bear all loads of radial load, axial load and torque load. Ring size is the minimum limit of miniaturization, especially very thin type is small size close to the limit, and has high rigidity, so the most suitable for use in industrial robot joint or rotating parts, machining center machine rotary table, hand rotating parts, precision rotary table, medical machine, metering device, IC manufacturing equipment etc.

1. Excellent rotation accuracy
The inner structure of the Cross Roller Bearing is arranged in 90 degrees perpendicular to each other by the roller.
The roller is equipped with a spacer or isolation block between the rollers to prevent the rolling of the rollers from being examined each other. In addition, the phenomenon of roller contact or locking will not occur. At the same time, because the inner and outer ring is a segmented structure, the clearance can be adjusted, even if the preload is applied, high accuracy rotation motion can also be achieved.
2. Simplification of operation and installation
The outer ring or inner ring, which is divided into 2 parts, is fixed together after loading the roller and the holder, so the operation is very simple.
3. Bear large axial and radial load
The roller is arranged vertically through the spacer retainer on a 90 degree V groove rolling surface.
4. Greatly save the installation space
The size of the inner and outer ring cross Roller Bearing is miniature minimal, especially ultra-thin structure is small size close to the limit, and has high rigidity, so the most suitable for industrial robot joints or rotating parts, machining center of the rotary table, the robot rotating parts, precision rotary table, medical instrument IC, measuring equipment, manufacturing device widely used.
5. high speed ability
6. reducing shaft length and machining cost, thermal expansion leads to a limited change in geometric size.
7. the nylon separator is used, the moment of inertia is low, the starting torque is low, and the angle degree is easy to control.
8. optimization of pretightening force, large rigidity, high precision of guiding roller
9. carbon steel provides excellent impact resistance and surface abrasion resistance
10. simple but fully lubricated

Crb Bearing

Crb Bearing,Cross Roller Slewing Bearing,Crb Turntable Slewing Bearing,Cross Roller Slewing Bearing Crb

LUOYANG AUTO BEARING CO.,LTD , https://www.ballbearing.nl