China Drying Network News Ordos Chemical Group's 300,000-ton/year ion-exchange membrane caustic soda project A line has been driven recently and produced qualified caustic soda, liquid chlorine and hydrogen chloride gas. The project is located in Qipanjing Industrial Park, Ordos, Inner Mongolia Autonomous Region, and the project is put into production symbol. The formal formation of the chlor-alkali recycling economy industrial chain in Qipanjing Industrial Park. It is reported that the project uses DuPont's ion membrane and Japanese chlorine project's natural cycle zero-electrode distance electrolyzer, brine process using SF membrane filtration system and membrane denitrification device. After the A line is put into operation, it will annually produce 150,000 tons of caustic soda and 200,000 tons of PVC. The equipment has been running smoothly since it was successfully started, and the supporting PVC equipment is under intense driving. On November 13th, qualified vinyl chloride monomer has been produced, which will open all the processes on the day and produce qualified PVC resin. PTA Powder
Main application:Repair and
strengthen workpiece surface, significantly
Welding method:PTA welding
Main equipment:PTA welding
machine
Flame core temperature: about 10000℃
Technological characteristics:PTA has high
temperature, concentrated energy, stable combustion, small heat affected zone,
fast welding speed, high production efficiency, easy to obtain low dilution
rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical
bonding,, bonding strength is high.
PTA welding technology is one of surface
strengthening methods, which has high deposition rate, low dilution rate, and
could be applied with many kinds of powder. The manufacturing craft of PTA
powder is normally gas atomization, which reduces satellite of powder. We
supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based
alloy powder, Cobalt-based alloy powder and Mixed Powder.
Nickel Based Alloy Powder possesses high
temperature resistance and wear resistance, it is the most popular alloy powder
applied by PTA welding both domestically and internationally. Coating hardness
is within the range of HRC 30-60. It could be applied to various industries
like agriculture, plastic, paper, marine and steel making where wear and
corrosion protection needed. Some examples are plunger, moulds, pump leaf and
screw.
Iron Based Alloy Powder is more widely used
and a more economic choice. With high abrasive resistance, it is more commonly
applied to mining tools, drilling tools and mixers of iron and steel making
industry, coal industry, shaft, oil and energy industry.
Cobalt Based Alloy Powder is recommended
for corrosion and oxidation resistance, with better hot hardness values than
equivalent Nickel based alloy powder. It is widely applied to steel making
industry, coal industry and mining industry.
Mixed powder mainly refers to NiCrBSi
mixing with other hard-phase powder such as cast tungsten carbide and other cemented
alloy powder, which allows the powder better hardness around HRC60 and
excellent abrasion resistance.
Mixed powder is more often used for mining
equipment for oil sands, lignite, oil drilling tools, excavator buckets,
extrusion screws for plastic processing, grain and oil processing, etc.
PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvaf.com
