A Starter (also self starter, self, cranking motor, or starter motor) is a device used to rotate [crank] an internal-combustion engine so as to initiate the engine's operation under its own power. Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the car starter motor can even be another internal-combustion engines.
Internal-combustion engines are feedback systems, which, once started, rely on the inertia from each cycle to initiate the next cycle. In a four-stroke engine, the third stroke releases energy from the fuel, powering the fourth (exhaust) stroke and also the first two (intake, compression) strokes of the next cycle, as well as powering the engine's external load. To start the first cycle at the beginning of any particular session, the first two strokes must be powered in some other way than from the engine itself. The starter motor is used for this purpose and is not required once the engine starts running and its feedback loop becomes self-sustaining
The electric starter motor or cranking motor is the most common type used on gasoline engines and small diesel engines. The modern starter motor is either a permanent-magnet or a series-parallel wound direct current electric motor with a starter solenoid (similar to a relay) mounted on it. When DC power from the starting battery is applied to the solenoid, usually through a key-operated switch (the "ignition switch"), the solenoid engages a lever that pushes out the drive pinion on the starter driveshaft and meshes the pinion with the starter ring gear on the flywheel of the engine.
Starter Car Starter Motor,12V Starter Motor,Tractor Starter,Auto Starter,12V Starter,24V Starter,12V Alternator Starter XIANJU PEXTOL TRADING CO., LTD. , http://www.pl-electric-cn.com
This is new designed machine, now more LED company use PC instead of glass, special for LED light.
Â
Â
Features:
1. it is stronger than glass,
2. it has good flexibility, not easy damage.
3. It has good transparency as glass, so no light waste.
4. It has very long life.
5. Easy to make, the production output is more than glass shade.
6. Fast production cause lower cost.
Â
SPECIFICATIONS FOR PC PROFILE PRODUCTION LINE
Model
Screw Diameter(mm)
Main Motor(kw)
Output Capacity(kg/h)
MT45
45/25
11
20-30
MT50
50/25
11
30-40
The line consists of:Â
Â
Hopper dryer
• To feed material into extruder;
Extruder
•World famous brand electrical component: Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
Die head
• 3Cr13/3Cr17 material
• Special for PC material mould
calibration table
• Width: 100mm
• Length: 4000mm
Haul off
• Upper/lower caterpillar driven separately and speed control by inverter
Cutter
•Synchronous drivingby air cylinder or servo motor control
Stacker
• Stainless steel304 as touching material
Why choose us:
♦ Ability to provide the customized plastic extrusion solutions.
♦ Turn-key solution provided include plant layout and design, formula, production support.
♦ Super extend sales guarantee for all our machines:18 months since the machine left supplier plant.
♦ Competitive price for all our machines to meet customer demand.
♦ World wide after services center: Hungary, Spain, Nigeria, UAE, Brasil, Peru......
Â
Polycarbonate (PC) LED Light/Lamp Shade Profile Extrusion Production Line
This is new designed machine, now more LED company use PC instead of glass, special for LED light.
Â
Â
Features:
1. it is stronger than glass,
2. it has good flexibility, not easy damage.
3. It has good transparency as glass, so no light waste.
4. It has very long life.
5. Easy to make, the production output is more than glass shade.
6. Fast production cause lower cost.
Â
SPECIFICATIONS FOR PC PROFILE PRODUCTION LINE
Model
Screw Diameter(mm)
Main Motor(kw)
Output Capacity(kg/h)
MT45
45/25
11
20-30
MT50
50/25
11
30-40
The line consists of:Â
Â
Hopper dryer
• To feed material into extruder;
Extruder
•World famous brand electrical component: Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
Die head
• 3Cr13/3Cr17 material
• Special for PC material mould
calibration table
• Width: 100mm
• Length: 4000mm
Haul off
• Upper/lower caterpillar driven separately and speed control by inverter
Cutter
•Synchronous drivingby air cylinder or servo motor control
Stacker
• Stainless steel304 as touching material
Why choose us:
♦ Ability to provide the customized plastic extrusion solutions.
♦ Turn-key solution provided include plant layout and design, formula, production support.
♦ Super extend sales guarantee for all our machines:18 months since the machine left supplier plant.
♦ Competitive price for all our machines to meet customer demand.
♦ World wide after services center: Hungary, Spain, Nigeria, UAE, Brasil, Peru......
Â
Polycarbonate (PC) LED Light/Lamp Shade Profile Extrusion Machinery
Model NO.: MT63
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Computerized
Profile Machine: LED Light Profile
Trademark: Midtech
Transport Package: Export Packing
Specification: Electric
Origin: China
HS Code: 84772000
Model NO.: MT63
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Computerized
Profile Machine: LED Light Profile
Trademark: Midtech
Transport Package: Export Packing
Specification: Electric
Origin: China
HS Code: 84772000
Polycarbonate (PC) LED Light/Lamp Shade Profile Extrusion Production Line