plastic PP PE bopp film granulating machine. It also can do with horizontal water-ring hot die face pelletizing way and wind cooling die face pelletizing way to meet the requirement of different material. 

Material is cut,pre-dried,pre-heated,pre-homogenized and compacted in the shredding/compactor drum.

Many materials can be processed directly without need of the upstream pre-shredding,resulting in a dramatic reduction in operational costs.

Less power consumption cost per kilogram,high throughput,reduced floor space occupation and operator attendance

This line can be used to process wasted thermo plastics: 
such as PA, PP, PS, PE, EPE, EPS,PET,UPS,ABS Film etc.  Like agriculture film/farm film and big bag.
  
Different screw design can produce different plastics.This is for hard or differend kinds of film.

Material types:Woven bag,printed LDPE film,film(rolls,loose,bundled),agricultural film waste,foamed plastics(EPS) and fibre, 

 

Metal detector on the Belt conveyer

Customer can decide to install or not install metal detector on the belt. Metal detector can check the melt, if there is melt the detector will alarm and stop, peope chect out the melt and throw it way, and restart the belt conveyer again.

Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
5. no air in the pellets.
6. The machine wih long life.

The advantages of the compactor
1. Counter current technology
      Hight process stability thorugh improved material intake ensures constantly high output over a considerably broader temperature rang
       Higher flexibility and operational reliability with a variety of materials
       Increased throughputs with the same plant size for more productivity
2. Smart Start
       Remarkably easy operate thanks to logical, clearly structured and simplified handing and ultramodern ergonomiic touchscreen disply.
       Fewer buttons, more user-friendliness-thanks to high degree of automat on including extensive control packages.
       The right recipe for every application-saved processing paramerter can be loaded easily and conveniently from the recipe management system at the push of a button
3. Save
        Lower specific energy requirements thanks to a complete package featuring design and process engineering measures including the new direct drive for the extruder screw
        Lower production costs through optimised control technology and high-quality, energy-efficient components such as high-performance motors
        Additionally, the parctical energy dispaly on your operating panel gives you a constant overvies of eenergy consumption at all times, thus enabling you to take specific measures to optimise consumption
        Environmental protection
More machine photoes
Layout of the machine

1.Belt conveyer                 2.Compactor           3.ML-130/33single screw extruder
4.Hydraulic screen changer       5.Vertical water-ring granulation system   
6.Chute                        7.Centrifugal dewatering
8. Vibration                     9. Wind transmission system
10.Silo storage

Compactor(with Counter current technology, more material can be send to the mouth of the screw feeder, then the machine capaicty will be much highr)

it works by the running of rotary cutter, stable cutter and the rotary cutter  cut the material and by friction the material will be compred. And with cutter base running the material can be better melt and flow into the extruder.
Material of contact raw material part: stainless steel,the other is made by carbon steel;
Stable cutter:3 group; rotary cutter:6 group;
AC motor power :90Kw;
Measuring temperature and cooling system
Cooling motor power:2.2kw

The Extruder  machine

Gear box:high torque,low noise,external connect with cooling recycling system;
Screw: 38CrMoA1A,Nitrogen treatment;
Barrel: 38CrMoAlA,nitrogen treatment,barrel wind-cooling; temperature controller
Drive power:DC motor(132kW);
Screw diameter:130mm;
L/D:33 :1;
Lubrication:forces lubricating;
Vacuum system:vacuum pump motor power 2X4kW
With one natural degassing and one vacuum degassing

Screen changer and water-ring die, chute, centrifugal dryer 
Double service position hydraulic screen changer for No stopping ,no leaking, changing screen time≤2 sec.
Motor power:2.2kW

Centrifural dryer and wind transmission system and silo
Material:bracket jointing by Q235,the others are stainless steel
Motor power:5.5kw
Rotate speed:1500rpm
Motor power:4kW;pipeline and tee joint T are made by stainless steel
Capability:500kg
Material :stainless steel

Pameter of such kinds of machine

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

Hydraulic Metal Baler Machine

Metal Baler Machine,Scrap Balers,Hydraulic Metal Baler,Scrap Baling Press Machine

Nantong Sika Machinery Co., Ltd. , https://www.sikamachinery.com