According to the requirements of the national standard GB12676-2014, N2 vehicles are required to install anti-lock brakes (ABS). The national standard will be implemented on July 1, 2015. What car is the so-called N2 model? Simply put, trucks with a total mass of more than 3.5 tons but no more than 12 tons. Specific to the car, we often say that the light trucks belong to this range. The role of ABS is to automatically control the brake braking force when the car is braking, so that the wheel is not locked and is in a state of rolling on the side to ensure that the adhesion between the wheel and the ground is at a maximum. Its benefits are so numerous. With it, every driver is like an expert during braking. First of all, to protect traffic safety The vehicle equipped with ABS can effectively maintain the stability of the vehicle during braking, maintain the vehicle steering function, shorten the braking distance, and ensure the safety of driving. On the contrary, the models without ABS are easy to slip when braking, tail fling or even rollover. At the same time, they are prone to steering failure and hit front obstacles or vehicles, which greatly increase the risk of driving. Second, ease the pressure on tires and drivers With the ABS vehicle, the driver can easily control the steering, deceleration, etc. during emergency braking, and can protect the tire and extend the service life of the tire. Without an ABS-equipped vehicle, the driver is prone to rush and increases the risk factor during emergency braking. Jiangling ABS light truck, leading the same level of braking performance Responding to the national policy requirements, Jiangling Light Trucks has been equipped with ABS as the standard for the safety of truck users. It has also upgraded all five national emission standards, has low-carbon environmental protection, and is highly energy-efficient. Jiangling ABS models in addition to considering the normal road (pure high, pure low attached), increase a variety of typical road conditions test to ensure that the road in all conditions is stable, in the same circumstances, the braking distance is much less than the basic level at the same speed . Compared to other manufacturers' ABS models, Jiangling Light Truck ABS models have a braking performance that far exceeds the national standard under the same braking conditions, with higher adhesion coefficient utilization rate and shorter braking distance. In addition, EBD (Electronic Brake Force Distribution) can replace the load-carrying proportional valve to further optimize the braking performance. The combination of ABS+EBD on ice and snow can effectively prevent skidding, and the safety of driving can be further upgraded.
In the simplest terms, 5-axis machining involves using a CNC to move a part or cutting tool along five different axes simultaneously. This enables the machining of very complex parts, which is why 5-axis is especially popular for aerospace applications. However, several factors have contributed to the wider adoption of 5-axis machining. These include: A push toward single-setup machining (sometimes referred to as [Done-in-One") to reduce lead time and increase efficiency
The ability to avoid collision with the tool holder by tilting the cutting tool or the table, which also allows better access to part geometry 5 Axis CNC Router Machine,CNC 5 Axis Router,5 Axis CNC Router,5 Axis CNC Machine JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncfiberlasers.com
 
 
 
 
Â
Improved tool life and cycle time as a result of tilting the tool/table to maintain optimum cutting position and constant chip load