Brass Screw in Handle is available for easy installation and removal
Excellent line lay oscillation system
Kma Spinning Reel Series,Fishing Reels,Fishing Reel Accessories,Saltwater Spinning Combo CIXI DONGSHANG FISHING TACKLE CO.,LTD. , https://www.dongshangreels.com
Gold shop vault door production process:
Cutting: The factory usually purchases large pieces of steel, so the first procedure is to cut these plates to the size required by the consumer.
Forming: After cutting the steel plate through the punch, mold, bending machine and other machinery and equipment, processing out of the door, motor parts, rear plate and other accessories.
Welding: Weld the various parts after molding, so that the door body basically forms the surface treatment: the vault door blank is polished through some meticulous processes, and then it is sprayed on the surface, because there are rust and oil stains on the surface. Therefore, the purpose of the phosphating process is to achieve the purpose of oil removal and rusting, and the polishing is smooth. Finally, high-temperature electrostatic spray treatment is performed to form a paint on the surface.
Assembly: The assembled vault door assembly locks (door locks, emergency locks, coded locks), operation panels, mechanisms (including latches, handles, etc.), back covers, mounting accessories (labels, instructions, etc.).
General inspection: When these are all processed, the product will pass the examination of a professional before it can determine that the product is unqualified. If it fails, it will be required to modify it. If it is qualified, it can be packaged and listed.
Jindian vault door picture: 
Jindian Treasury Gate Note:
1. The surface of the vault door that has just been produced will have a blue protective film. This is to prevent the decoration from entering the ash.
2. For the active part of the locking bolt opening and closing mechanism, add oil once every quarter.
3. When the password of the ordinary mechanical password lock needs to be adjusted, the screw on the number dial can be moved to a new position and the new password can be determined again.
Front drag
Thick bail arm
Super strong drive gear
Hight intensity graphite material
Micro-adjusting drag system
ITEM
Gear Ratio
Ball Bearing
Line Capacity(mm/m;Lbs/yds)-Standard
KMA1000
5.2:1
1BB-7BB/2+1BB-9+1BB
0.20/310 0.25/200 0.30/140; 6/340 8/220 10/150
KMA2000
5.2:1
1BB-7BB/2+1BB-9+1BB
0.20/390 0.25/250 0.30/170; 6/420 8/270 10/185
KMA3000
5.2:1
1BB-7BB/2+1BB-9+1BB
0.30/250 0.35/200 0.40/110; 8/270 10/185 12/120
KMA4000
5.2:1
1BB-7BB/2+1BB-9+1BB
0.35/180 0.40/140 0.45/110; 10/200 12/145 15/115
KMA5000
5.2:1
1BB-7BB/2+1BB-9+1BB
0.35/310 0.40/240 0.45/190; 10/340 12/260 15/207
KMA6000
5.2:1
1BB-7BB/2+1BB-9+1BB
0.35/350 0.40/270 0.45/210; 11/380 13/295 15/230
Gear Ratio
5.2:1
Bearings
1BB--7BB
Bearings
2+1
9+1
Gold store vault door production process exposure
The golden shop vault door production process was exposed, and most consumers who mentioned the gold shop vault gate had never heard of it. It was a security facility that was applied to the gold shop, but now with the changes in the market, many local tycoons have renovated gold. At the time of the shop, gold shop vault doors are installed to store some of the more valuable items. What is the production of such a high-force product?