HP
Non Cracked Overlay Plate is a ground, non-stick surface produced to minimize
or eliminate material adhering to the surface.
The
low coefficient of friction allows for reduced sticking or carryback in a
variety of application such as chutes, hoppers, and mobile equipment and truck
box liners.
Besides
this grade plate, HP Wear Resistant Group offers various products of wear
plates namely Cr-Carbide Weld Clad Plates, Smooth Surface CCO plate, Heat
Treated Wear Plates (AR Plate or Q&T Steel), Casting Plates, Tungsten
Carbide Coated Plates in various grade and multiple size options. Composite
Wear Plate is a bi-metal plate consisting of a low carbon or alloyed steel base
plate and a layer of wear resistant deposit.
The
low carbon steel base plate enables the plate to be welded, bolted or studded
to existing structures, while the hard facing provides the premier
wear-resistant surface capable of working in all applicable service conditions
at either ambient or elevated temperatures.
Due
to its excellent properties, HP Wear Plates work for long-lasting service life
and superb performance, which are well applied to the industries like Cement
Plant, Steel Mill, Mining Site, Power Generation, Construction, etc-anywhere
need combat with abrasion.
Industrial Applications
Mining, Cement and Brick
Dozer Moldboards. Shovel
Liners. Chute Liners. Dragline Buckets. Classifier Screens. Mine and Quarry
Skips. Pug Mill Paddles. Compactor Rollers. Bucket Lips. Dipper Buckets. Ore
Cars. Ore Scrapers. Dump Truck Body Beds. Loaders and High Lifts. Skid
Plates.
Steel Mills
Blast Furnace. Coke Oven and
Sinter Plants. Skip Car Liners. Sinter Breakers. Ore Bucket Liners. Receiving
Hoppers. Grizzly Bars. Feeder Bins. Conveyor Buckets. Chutes. Spiked Roll
Crushers.
Power Plants
Pulveriser Mills. Cyclones.
Receiving Hoppers. Liner Plates. Coal Handling Systems. Coal Buckets.
Conveyors. Fan Blades and Housings.
General Industry
Grain Chutes. Rub Bars for
Conveyor Chains. Agitator Paddles. Dredge Pump Liners. Grit Blast Liners.
Centrifugal Pump Liners. Mower Skid Plates.
The mechanically strong
interface between the alloy and steel backing is clearly depicted in this
cross sectional photograph of Wear Plate.
Non Cracked Overlay Plate, Smooth Hardfacing Wear Plate, Cement Vertial Mill Wear Plate, Composite Wear Plate HuiFeng Wear Resistant Group , https://www.hpwearsolution.com
After the installation of wooden doors, there are the following points:
1. When clearing the stain on the surface of the wooden door, use a soft cotton cloth to wipe the surface of the product with a hard cloth. When the stain is too heavy, you can use a neutral detergent, toothpaste, or household-specific cleaning agent to remove the stain, wipe it dry, and avoid flushing with clean water.
2. Pay attention to dipping the neutral agent or water rag, do not put it on the surface of the solid wood door for a long time, otherwise it will harm the surface, so that the surface finish material discoloration or peeling.
3, hinges, locks are active accessories, should be immediately tightened when the loose occurs, the location of the hinge should be timely oil injection, if the lock is not flexible, you can insert a proper amount of pencil core powder into the key hole, not accidentally oil. When using wooden door products, the relative humidity of the indoor air should be kept as much as 60%-75%. During the period of geothermal heating, when the wooden door that is not installed is stored, it must be stored directly in the ground baking place. Due to the characteristics of wood drying and shrinking, in the case of large differences in temperature and humidity, such as a slight cracking or shrinkage is a normal phenomenon, do not panic, this phenomenon will disappear naturally with the seasonal changes. In order to maintain the bright color of solid wood doors, it should be regularly waxed for maintenance.
4. The artificial wooden door is made of wood fiberboard. Relatively speaking, the coefficient of deformation is very small. As long as the joint is tightly fitted, the dimensions are regular, and the installation is fine, there will not be obvious changes afterwards, but its environmental protection is not as good as solid wood doors.
Four points after the installation of wooden doors
If the window is the eyes of a dwelling, then the door is the neckline of the dwelling. It is an indispensable real thing and an ornament that cannot be omitted.