EPS Sandwich Wall Panel Production Line Making Machine

<

Model NO.: WLFM
Pressure: 550 to 700 Kpa
Solidify: 1.2 M3 /Min
Panel and Profile: See Attachment.
Top Coil: 0.5-0.6mm, 280MPa
Lower Coil: 0.5-.06mm, 280MPa
Laminating Speed: at 1-3m/Min
Feature: Metal Panel, Environmental, Light Weight, Fireproof
Grade: 3
Trademark: WILLINGIN′T
Transport Package: Wooden Cases
Specification: CE& ISO9001
Origin: China
Shutter Door Roll Forming  Machine
 Brief  Introduction 
wl-eps laminator for corrugated sandwich panel is a integrated production line consisting of a  roll forming machine and a sandwich penal laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine is consists of uncoiler, main body. The laminating system is consists of feeding, glue, heating, laminating and post-cutting.
The whole machine is under control of PLC.
The line can produce single corrugated sheet, and can also laminate the sandwich panel with EPS.
The suitable material is colored galvanized steel sheet with height 0.4-0.6mm,the inserted material is EPS.
 

EPS Sandwich Wall Panel Production Line Making Machine
   Components and Functions
Standard Decoilers For use with 1200±5 mm wide steel coil sheet up to 5 tons in weight. The coil holder is supplied with two supporting wood and expanding mandrels. It is un-powered.
The Max. outer diameter is 1260mm,the inner diameter is 500mm or 600mm.
Hydraulic Station To supply the power for cutting, it is off work when the cutting stop
Consecutive Laminating Body Consists of guiding, laminating, glue providing, glue scraping, heating, auto cutting and controlling.  
Coil Guiding equipment When the coil sheet come the laminator, the guiding system ensures the sheet to the correct position.
Pre-heating system Before glue scraping, the coil sheet will be heated in this system.
Guiding roller core When the EPS fed to the machine, the guiding roller will guide the EPS to the laminating cabinet, the roller core will go the cabinet too. This makes the EPS closer to the top and lower coil sheet, thus make the finished panel more solid.
Glue Providing There are 4 drum stand, with proportion at 60:40 ( the glue is provided by the buyer, and the quality shall be meet the speed at 3-4 meters per minute). The glue will scraping at 4 directions,  this guarantees the glue can be supplied at different speed.
This part is operated separately.
Glue Filling Pad The pad is in to-and-fro movement, there are air cushions on the concrete pad.
Heater To open the heating pipe or not and how many pipes to open, is depend on the temperature and the solidify time of glue. The heater is to heat the top and lower coil sheet at appropriate temperature in laminating
Cutting system ( for laminating use ) In production, when the sandwich panel meet the set length, the system will cut the panel with milling cutter. (also  equipped with another set of straight cutter)
PLC Control System Main components imported from Mitsubishi. All language in English.
Supporting Table The finished panel will come out to the table.
Safety Guard All the chains and sprockets are covered with a guard. this will prevent the workers from injured
C-shaped groove-making equipment This equipment is prepared for making the mineral wool sandwich panel
Groove-making equipment for EPS To make the grooves of the EPS, make it possible for the buyer to produce the rabbet joint sandwich panel.
Edge cutting equipment To amend the edge of the EPS after the panels are laminated.

Working Flow

feed the lower coil sheet   ---- sheet guiding  ----- glue adding ----- feed the top coil sheet ------ sheet guiding ----- folding ----- g;lue adding-----feed EPS panel ------- add glue to EPS panel ----- upper and lower roller of the laminator tighten and roll ------- heating  -------  groove making------post cutting  (under control of  PLC, adopt encoder to meet the set length, automatic cutting) -------- sandwich panel come to the supporting table

EPS Sandwich Wall Panel Production Line Making Machine
Standard Equipment of Machine:
1 Manual Uncoiler 1set
2 Infeed Guide 1set
3 Roll Forming Station 1set
4 Rectifying Device 1set
5 Post-cut Equipment 1set
6 Hydraulic Station 1pc
7 PLC Control Console 1pc
8 Product Support Table 2pcs
9 Spare Parts 1box
EPS Sandwich Wall Panel Production Line Making Machine
We are a manufacturer in China
we can make the machine as per as your request.

About the machine,
we need you to provide us informaton,
1. profile drawing and size of product (model), 
2. steel thickness range,
3. coil width,
4. steel stress, 
5. requirements for configuration.

For price and other details, we welcome you to inquire us. 

Please Contact Miss. Lucy
Â