Many people, because of their lack of self-cultivation, have developed a habit of throwing trash at random. This not only creates a heavy workload for sanitation workers, but also increases the number of garbage trucks used. Therefore, it is important to understand the daily precautions of some garbage trucks and to eliminate the possibility of garbage truck repairs due to increased frequency of use. 1, according to the correct use of the relevant operations. For hoisting garbage trucks, the most important part is the chassis and the engine. If the owner does not use the correct method of operation to control it at random, then the damage of the engine's chassis will be very large. Therefore, during use, the owner should strictly follow the operating conditions in the manual to perform related operations. 2. For the new hoisting garbage truck, when it is used for the first time, it must use a long enough time and a sufficient number of miles to allow its internal components to get a better run-in. The speed is slow, and you can't raise the speed very high and then slam on the brake again. 3. Regularly change the working oil in the oil tank. When replacing the working oil, ensure the correctness of the injection method. During operation, first open the screw plug, then fill in the new oil from the above small hole. After some new oil enters, start the engine to check if the filling is correct, and repeat the error twice to complete the entire filling and then to the garbage truck. Start it. 4. Always inspect the garbage truck for oil leakage. If there are signs of oil leakage in the hydraulic system, stop using it immediately and send it to the nearest repair shop for repair. 5. Wash the garbage truck every day. Many people may feel that washing garbage trucks over time can easily damage the surface finish of garbage trucks. In fact, this is not the case. If after a day's work, the garbage trucks are not cleaned, the corrosive substances and highly decaying moldy materials that remain on the garbage trucks will make the entire garbage trucks become Very scary. If this situation continues, it will also cause a lot of germs to grow on the garbage truck.
Aluminum Polishing Sheet is a special Aluminum Sheet.Its surface has been polished hence gives good performance in surface condition.The advantage of aluminum sheet is as follows:
1. Easy to process.
Aluminum Panel Sheet,Polished Aluminum Sheet,Polished Aluminium Sheet,Aluminium Profile Sheet Trumony Aluminum Limited , https://www.szaluminumtube.com
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.