Iron shavings briquetting machine is mainly used for all kinds of scrap metal, scrap iron, copper scrap, aluminum scrap, etc.), powder, granular powder, metal smelting additives, sponge iron bearing etc. Without any adhesion agent, the block (weight 2-8 kg) density can reach more than 5 t/M3, the briquettes can directly be used in furnace. Independent electrical control system, reliable operation, intuitive operation, easy maintenance. Iron Briquetter, Iron Scraps Briquette Machine, Iron Chips Briquette Machine, Iron Briquetting Press, Iron Briquetting Machine Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycle.com
specification
Medium
Air. oil. water. wind
Â
  Fin types
  application
       features
Width series
Â
Â
Â
Fins
BW(wavy-fin)
external fin
Widely used(better heat emission capacity)
2.0mm,2.5mm,
3.0mm,3.8mm
4.7mm,5.6mm,
6.5mm,8.0mm,
9.0mm,9.5mm,
10.3mm,11.3mm
11.7mm,12mm
JC(serrated-fin)
Internal&external fin
Widely used(better heat emission capacity);large friction resistance
DK(perforated-fin)
Internal fin
Â
PZ(plain-fin)
Internal&external fin
Used in construction machinery
BY(Louvered-fin)
External fin
Â
                                       Veriety of heat exchangers
Classification according to
The medium
1)Oil cooer;Â water radiater;Â air cooler;Â intercooler;
2)Combined oil-water cooer; combined oil-air cooer; combined water-air cooler; combined oil-air-water cooler
3)air separator; condensator evaporator
Classification according to
the
application
For engineer machinery(excavator,loader,bulldozer,roller,drilling,crane,paver,scraper and so on)
For compressor(screw compressor and reciprocating compressor)
For chemistry industry
For petroleum chemical industry
For automobile
For watercraft,marine engineering
For offshore engineering
For steel industry
For HVAC
For textile industr
Custom Hydraulic Aluminum Plate-Fin Heat Exchanger
1.High heat transfer efficiency, good temperature controllability:
  Special fin structure, the fluid to form a strong turbulence, thus effectively reducing the thermal resistance,improve heat transfer efficiency.
2.Compact:Heat transfer area density can be as high as 17300 m2 / m3
3.Lightweight, practical good:Fin thin, but the structure is very compact, small size, and available aluminum alloy which is lightweight and low cost.
4. High reliability:Full brazing structure, eliminate the possibility of leakage. Meanwhile, both the fin hea transfer surface and the supporting role, it is high intensity.
             
Production Process 
Related Products
Packaging
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in wooden boxes and cartons.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Â
specification
Medium
Air. oil. water. wind
Â
  Fin types
  application
       features
Width series
Â
Â
Â
Fins
BW(wavy-fin)
external fin
Widely used(better heat emission capacity)
2.0mm,2.5mm,
3.0mm,3.8mm
4.7mm,5.6mm,
6.5mm,8.0mm,
9.0mm,9.5mm,
10.3mm,11.3mm
11.7mm,12mm
JC(serrated-fin)
Internal&external fin
Widely used(better heat emission capacity);large friction resistance
DK(perforated-fin)
Internal fin
Â
PZ(plain-fin)
Internal&external fin
Used in construction machinery
BY(Louvered-fin)
External fin
Â
                                       Veriety of heat exchangers
Classification according to
The medium
1)Oil cooer;Â water radiater;Â air cooler;Â intercooler;
2)Combined oil-water cooer; combined oil-air cooer; combined water-air cooler; combined oil-air-water cooler
3)air separator; condensator evaporator
Classification according to
the
application
For engineer machinery(excavator,loader,bulldozer,roller,drilling,crane,paver,scraper and so on)
For compressor(screw compressor and reciprocating compressor)
For chemistry industry
For petroleum chemical industry
For automobile
For watercraft,marine engineering
For offshore engineering
For steel industry
For HVAC
For textile industr
Custom Hydraulic Aluminum Plate-Fin Heat Exchanger
1.High heat transfer efficiency, good temperature controllability:
  Special fin structure, the fluid to form a strong turbulence, thus effectively reducing the thermal resistance,improve heat transfer efficiency.
2.Compact:Heat transfer area density can be as high as 17300 m2 / m3
3.Lightweight, practical good:Fin thin, but the structure is very compact, small size, and available aluminum alloy which is lightweight and low cost.
4. High reliability:Full brazing structure, eliminate the possibility of leakage. Meanwhile, both the fin hea transfer surface and the supporting role, it is high intensity.
            Â
Production ProcessÂ
Related Products
Packaging
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in wooden boxes and cartons.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Â
Customized Aluminum Brazed Aluminum Hydraulic Oil Cooler Core
Model NO.: Customized Request
Delivery Time: 3weeks
Usage: Customized
Weight Range: 3-150kg
Voltage: 220V/380V
Power Range: 2kw-40kw
Trademark: TECFREE
Transport Package: Ply Wooden Case
Origin: Wuxi, China
HS Code: 87089190
Model NO.: Customized Request
Delivery Time: 3weeks
Usage: Customized
Weight Range: 3-150kg
Voltage: 220V/380V
Power Range: 2kw-40kw
Trademark: TECFREE
Transport Package: Ply Wooden Case
Origin: Wuxi, China
HS Code: 87089190