Manufacture with imported Germany Deutz company production certificate with the power range of 195 to 560kw . The product is of high speed four-storke water cooling Diesel Engine with V-90°. The one-cylinder-one-head structure ensures generality of parts , inner oil pope,inner water chnnel,four-valve, center top-mounted 8 hole fuel injector,turbo-inter-cooled. It features high power, low fuel consumption, large torque,perfect plateua adaptability,low noise and simple maintenance. BFM1015 series diesel engine has an excellent cold starting performance . Without the starting assistant, 6-cylinder engine can start at -19℃,and 8-cylinder could be -17℃.If starting assistant equipped , the 6-cylinder engine can start at -35℃ and -32℃ on V8 engine
Deutz Diesel Engine,6 Cylinder Diesel Engine,Deutz Industrial Engines,Water Cooled Engines,Deutz 1015 Engine Shijiazhuang Houfeng Trading Co.,Ltd , http://www.hfdieselengine.com
1. Casting machine adopt trackless steel cable, and distance of run is more than 6.2 meters.
Casting machine adopts frequency control; Adjusting range of speed is about 25~650mm/min. It can move inching up/down or automatically. Digital display the speed, casting length, cooling water temperature and aluminum liquid temperature, as well as audible alarm before reaching the end of casting and safety stop before empty car coming up to the position.
2. Adopt single coiling block with four steel cable, casting machine steel cable diameter is about φ 14, maximum stress toleration is 15T( when in high water level). Worm speed reducer center distance is 280mm. Winding engine has manually operation falling-off equipment and spring auxiliary starting equipment. All the control equipment of winding engine and hydraulic system are converged on one electric cabinet.
3. Framework material of cast pit is 25#channel steel and steel sheet. Four main chain wheel of cast windlass engine are established in the pit framework as well as tilting pedestal and arm.
4. Mould cast table raise to 90o. Tilting mechanism is operated by hydraulic system. Hydraulic cylinder and pump Germany brand made in China, and main hydraulic valves are made in Taiwan. Both revolving joint and connector for entering water are established on the side of tilting arm, size of connector is 4 inch.
Well mouth size: 2000× 2000;
Aluminum billet casting length: 6000
Each time casting weight: φ 127 -1mm× 24 PC(5 MT )
Each time casting weight: φ 152 -1mm× 16PC(5MT )
Each time casting weight: φ 178 -1mm× 12PC(5MT )
Material of launder, filter box, distributor inside cast mould table and the bushing are "ZHONGNAI NO 1". Frame of launder and filter box are made of steel; Inside lining is made of "ZHONGNAI NO 1" preformed unit; Filter box size is 15 inch, including electric heating and hydraulic lid lifter device.
Porcelain filter size: With ceramic filter
Technology parameter:
1. Casting machine adopt trackless steel cable, and distance of run is more than 6.2 meters.
Casting machine adopts frequency control; Adjusting range of speed is about 25~650mm/min. It can move inching up/down or automatically. Digital display the speed, casting length, cooling water temperature and aluminum liquid temperature, as well as audible alarm before reaching the end of casting and safety stop before empty car coming up to the position.
2. Adopt single coiling block with four steel cable, casting machine steel cable diameter is about φ 14, maximum stress toleration is 15T( when in high water level). Worm speed reducer center distance is 280mm. Winding engine has manually operation falling-off equipment and spring auxiliary starting equipment. All the control equipment of winding engine and hydraulic system are converged on one electric cabinet.
3. Framework material of cast pit is 25#channel steel and steel sheet. Four main chain wheel of cast windlass engine are established in the pit framework as well as tilting pedestal and arm.
4. Mould cast table raise to 90o. Tilting mechanism is operated by hydraulic system. Hydraulic cylinder and pump Germany brand made in China, and main hydraulic valves are made in Taiwan. Both revolving joint and connector for entering water are established on the side of tilting arm, size of connector is 4 inch.
Well mouth size: 2000× 2000;
Aluminum billet casting length: 6000
Each time casting weight: φ 127 -1mm× 24 PC(5 MT )
Each time casting weight: φ 152 -1mm× 16PC(5MT )
Each time casting weight: φ 178 -1mm× 12PC(5MT )
Material of launder, filter box, distributor inside cast mould table and the bushing are "ZHONGNAI NO 1". Frame of launder and filter box are made of steel; Inside lining is made of "ZHONGNAI NO 1" preformed unit; Filter box size is 15 inch, including electric heating and hydraulic lid lifter device.
Porcelain filter size: With ceramic filter
Continuous Casting Machine for Brass Pipe and Bar
Technology parameter: