Common Rail Parts,Spool Valve,Spool Valve for C7 New Densen Casting And Forging I & E Co., Ltd. , http://www.yassiancast.com
Model: RD10+
Deep hole reverse circulation drilling rig
The well proven and dependable RD10+ is designed for deep hole RC drilling. With a pullback capacity of 445 kN (100000 lbf) it can be used to access mineral deposits around 1200 m (4000 ft) deep. Atlas Copco knows that to consistently hit pay dirt, your drill has to work fast, dig deep and keep working no matter what the rock, weather, or machinery throws at you. This is the mindset behind the Atlas Copco RD10+ hydraulic tophead drive exploration drill. It's a tough high-speed, reverse circulation drill that delivers the depth and durability to bring results.
Features & benefits
A 563 kW (755 hp) deck engine with an isolated powerpack base; This drives the hydraulic gearbox and the air compressor
The exclusive in/out box allows the compressor to be disconnected when not needed saving fuel and increasing component life
Two function-zoned consoles allow precise setup and operation of the machine
Fast rod handling with the standard jib boom and hoist
The derrick allows for a 0-to-45 degree drilling angle, and the derrick dumps to ground level and the jacks provide stability
Optional mud manifold for "off board" mud pump
Technical data
Technical Specifications
Feed System - Pullback
445 kN
Feed System - Pulldown
133 kN
Feed System - Fast travel down, max
55 m/min
Feed System - Fast travel lift
34 m/min
Rotation Unit - Torque
13560 Nm
Rotation Unit - Rotation speed
0 - 100 r/min
Slips and Breakout - Derrick table max. opening
508 mm
Diesel Deck Engine Cummins - QSK19
563 kW
On-board Compressor, IR HR 2.5 - FAD
590 l/s @ 24 bar (1250 cfm @ 350 psi)
On-board Compressor, IR HR 2.5 - Drill pipe size
(4 1/2 in / 114 mm or 5 1/2 in / 140 mm) OD x 20 ft (6.1 m)
On-board Compressor, IR HR 2.5 - Depth
915 m
Model: RD10+
Deep hole reverse circulation drilling rig
The well proven and dependable RD10+ is designed for deep hole RC drilling. With a pullback capacity of 445 kN (100000 lbf) it can be used to access mineral deposits around 1200 m (4000 ft) deep. Atlas Copco knows that to consistently hit pay dirt, your drill has to work fast, dig deep and keep working no matter what the rock, weather, or machinery throws at you. This is the mindset behind the Atlas Copco RD10+ hydraulic tophead drive exploration drill. It's a tough high-speed, reverse circulation drill that delivers the depth and durability to bring results.
Features & benefits
A 563 kW (755 hp) deck engine with an isolated powerpack base; This drives the hydraulic gearbox and the air compressor
The exclusive in/out box allows the compressor to be disconnected when not needed saving fuel and increasing component life
Two function-zoned consoles allow precise setup and operation of the machine
Fast rod handling with the standard jib boom and hoist
The derrick allows for a 0-to-45 degree drilling angle, and the derrick dumps to ground level and the jacks provide stability
Optional mud manifold for "off board" mud pump
Technical data
Technical Specifications
Feed System - Pullback
445 kN
Feed System - Pulldown
133 kN
Feed System - Fast travel down, max
55 m/min
Feed System - Fast travel lift
34 m/min
Rotation Unit - Torque
13560 Nm
Rotation Unit - Rotation speed
0 - 100 r/min
Slips and Breakout - Derrick table max. opening
508 mm
Diesel Deck Engine Cummins - QSK19
563 kW
On-board Compressor, IR HR 2.5 - FAD
590 l/s @ 24 bar (1250 cfm @ 350 psi)
On-board Compressor, IR HR 2.5 - Drill pipe size
(4 1/2 in / 114 mm or 5 1/2 in / 140 mm) OD x 20 ft (6.1 m)
On-board Compressor, IR HR 2.5 - Depth
915 m
Atlas Copco Drilling Rig, Drill Rig, Designed for Deep Hole RC Drilling (RD10+)
Model NO.: RD10+
Trademark: Atlas Copco
Origin: Nanjing, China
HS Code: 84304129
Model NO.: RD10+
Trademark: Atlas Copco
Origin: Nanjing, China
HS Code: 84304129
Atlas Copco drilling rig, drill rig, designed for deep hole RC drilling