Air Gas LNG LPG Gas Vortex Precession Flowmeter

<

Model NO.: LUGB
Trademark: U-ideal
Transport Package: Wooden Case or Carton
Specification: ANSI JIP DIN JS and others
Origin: China
HS Code: 90261000
Vortex Flow Meter

1. Product Description

LUGB series Vortex flow meters are designed for measuring the volume/mass flow of liquids, gases and steam based on Karman vortex principle.
Adopting advanced differential algorithm along with measurement of isolation, shielding and wave filtering, LUGB series vortex flow meters have the advantages of immunity on vibration and noise. Meanwhile, the liabilities of LUGB series vortex flow meters are well guaranteed by unique sensor packaging technology.
Upon receipt, examine your meter for visible damage. The Vortex is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a thorough inspection. If any items are damaged or missing, contact us.
Make sure the Vortex flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the Vortex. Refer to the nameplate for your customized product's specification.

2.Technical Data

Measuring system

Application range (1) Gas; (2) Liquid; (3) Steam
Measured Value  
Primary measured value Flow Rate
Secondary measured value Volume flow ; (Pressure and Temperature is available for model with compensation)
 

Design

Features  
Modular construction The measurement system consists of a flow sensor and a signal converter. It is available as compact and as separate version.
Compact version converter N Type: Pulse output without local display
A Type: 4-20mA Output without local display
B Type: Local Display; Lithium Battery Power; No Output (Battery Part No.:
ER26500)
C Type: Local Display; 24V DC Power; 4-20mA
Output;
Optional Function:
  1. Backup Power Supply: Lithium Battery
  2. Modbus RS485
  3. Pulse Output
Connection  
Flange: DN15-DN300
Wafer: DN15-DN300
Measurement Ratio Standard - 10:1
 

Measuring accuracy

Reference conditions Flow conditions similar to EN 29104
Medium: Water / Gas
Electrical conductivity: ≥ 300 μS/cm
Temperature: +10...+30°C / +50...+86°F
Inlet section: ≥ 10 DN
Operating pressure: 1 bar / 14.5 psig
Flow Meter Accuracy  
For Liquid: 1.0% of rate
For Gas and Steam: 1.5% of rate
 

Operating conditions

Temperature  
Process temperature T1 Level: -20...+70°C
T2 Level: -20...+250°C
T3 Level: -20...+350°C
Ambient temperature
(all versions) 		Standard (with aluminum converter housing):
-10…+55°C
Storage temperature -20...+70°
Pressure  
EN 1092-1 DN200…DN300: PN10
DN100…DN200: PN 16
DN15…DN80: PN 25
Other pressures on request
ASME B16.5 1/2"...8": 150 lb RF
Other pressures on request
JIS 1/2"...8": 10 K
Other pressures on request
 

Installation conditions

Installation Take care that flow sensor is always fully filled
For detailed information see chapter
"Cautions for Installation"
Flow direction Forward
Arrow on flow sensor indicates flow direction.
Inlet run ≥ 10 DN
Outlet run ≥ 5 DN
 

Materials

Sensor housing SS304
Other materials on request
Flanges SS304
Other materials on request
Converter Housing Standard: polyurethane coated die-cast aluminum
 

Process connections

Flange  
EN 1092-1 DN15...300 in PN 6...25
ASME 1/2"…12" in 150 lb RF
JIS 1/2"…12" in 10...20K
Design of gasket surface RF
  Other sizes or pressure ratings on request
Wafer DN15…DN300
 
Measurable Flow Rate Range:
Note: The flow range as blow is for reference only. Consult the factory if you have special requirement. Refer to the nameplate or certificate for actual flow range.
Nominal Diameter Liquid Gas
(mm) (in.) Flow (m3/h) Flow (m3/h)
15 1/2" 1.2 to 6.2 5 to 25
20 3/4" 1.5 to 10 8 to 50
25 1" 1.6 to 16 10 to 70
40 1-1/2" 2.5 to 25 22 to 220
50 2" 3.5 to 35 36 to 320
65 2-1/2" 6.5 to 65 50 to 480
80 3" 10 to 100 70 to 640
100 4" 15 to 150 130 to 1100
125 5" 25 to 250 200 to 1700
150 6" 36 to 380 280 to 2240
200 8" 62 to 650 580 to 4960
250 10" 140 to 1400 970 to 8000
300 12" 200 to 2000 1380 to 11000
 

3. Model and Selection

Table 1: Model Selection Guidance for Vortex Flowmeter
Model Suffix Code     Description
LUGB-                
Connection 1             Flange
2 Wafer
Fluid 0 Gas
1 Liquid
2 Steam
Diameter   Three Digitals; for example:
010: 10 mm; 015: 15 mm;
080: 80 mm; 100: 100 mm
Structure Z Compact Type
F Remote Type
Converter N No display; 24V DC; Pulse Output
A No display; 24V DC; 4-20mA Output
B Local display; Lithium Battery Power; No output
C1 Local display; 24V DC Power; pulse output & RS485
Optional backup power: Lithium Battery
C2 Local display; 24V DC Power; 2 - wire 4-
20mA Output
Optional backup power: Lithium Battery
C3 Local display; 24V DC Power; 3 - wire 4-
20mA and pulse Output, with RS485
Optional backup power: Lithium Battery
D Temperature / Pressure Compensation
D1_1:  24V DC Power, LCD+pulse+2wire 4-20mA;
D1_3: battery+DC24V power, LCD+ pulse,
3-wire 4-20mA, Modbus RS485
D1_4: DC24V power, 2-wire 4-20mA + Hart;
Refer to the photo on cover (Right One)
Explosion Rating   N Safety Field without Explosion
E ExdIIBT6
Flange Standard     -DXX DXX: D06, D10, D16, D25, D40
D06: DIN PN6; D10: DIN PN10
D16: DIN PN16; D25: DIN PN25
D40: DIN PN40
-AX AX: A1, A3, A6
A1: ANSI 150#; A3: ANSI 300#
A6: ANSI 600#
-JX JX: J1, J2, J4
J1: JIS 10K; J2: JIS 20K; J4: JIS 40K
-WF Wafer Connection; Mating Flange included.
Fluid Temperature       -T1 -20...+70°C
-T2 -20...+250°C
-T3 -20...+350°C
Special requirements   N If no special requirements.
Model Code: LUGB-2S050ZCN-WF-T2-N
Explanation - Wafer Connection; Fluid: Steam; Diameter: 50mm; Compact Type; Converter: 24V DC Power Supply, 4-20mA Output, Local Display; No Explosion; Fluid Temperature: 20…+250°C
 

Test instrument and equipment

High-end refrigeration instrument testing equipment, source factory,High-end refrigeration instrument testing equipment, source factory, stock inventory, can accept customization and OEM service


Our company has always had strict quality control standards in the market of refrigeration and heat exchange equipment, focusing on providing customised services to our customers. Not only do we have high requirements for the selection of raw materials, but we also keep up to date with the latest production processes and have high testing standards.

Our company mainly produces products for:Fin Evaporator.Fin Type Condenser.Capillary Tube. Coolant Reservoir.Plate Reinforcement Parts.Stamped Parts. Aluminum Tube .Instrument Testing Equipment.



If you have any interest, please feel free to contact us. We can provide customized service according to your drawings or samples.


Instrument Testing Equipment,Precision Salt Mist Tester,Salt Spray Tester Tester,Adjustable Electric Heating Plate

Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.ycevaporator.com